Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-FG F-50 GRAPHITE FORGING LUBRICANT ACHESON
- Product Code
- 2281995
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately remove victim to fresh air.
Immediately wash skin thoroughly with soap and water.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes.
Do not induce vomiting.
Immediate Medical Attention
If symptoms develop and persist, get medical attention (inhalation/skin). Seek immediate medical attention (eye contact). Get immediate medical attention (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is an aqueous mixture which will not burn.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-FG 855 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417M GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 566AL GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG GP 101 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F-87 FORGING LUBRICANT ACHESON
---
BONDERITE L-FG GP 714 FORGING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
Store between 5 °C (41°F) and 30 °C (86°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Protect from direct sunlight. Protect from freezing, freezing temperature is <=32F (<=0°C).
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Elevated temperatures.
Acids.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-FG F-50 GRAPHITE FORGING LUBRICANT ACHESON?
The signal word is danger.
What is the physical form of BONDERITE L-FG F-50 GRAPHITE FORGING LUBRICANT ACHESON?
BONDERITE L-FG F-50 GRAPHITE FORGING LUBRICANT ACHESON is a liquid with black color. It has mild odor.
What is the solubility of BONDERITE L-FG F-50 GRAPHITE FORGING LUBRICANT ACHESON?
Disperses in water as a suspension Water
What is BONDERITE L-FG F-50 GRAPHITE FORGING LUBRICANT ACHESON used for?
Lubricant
What are the hazard statements for BONDERITE L-FG F-50 GRAPHITE FORGING LUBRICANT ACHESON?
This substance has 2 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
What is the melting point of BONDERITE L-FG F-50 GRAPHITE FORGING LUBRICANT ACHESON?
The melting point is Not available. and the boiling point is 100 °C (212°F)calculated.