Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK
- Product Code
- 937238
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Part A of 2-K-Epoxy Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Get immediate medical attention. Seek medical attention at once.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9364FR AERO PART B 50ML KIT known as EA 9364FR PT B 50ml SEMP AK
---
LOCTITE EA 9321 AERO PART B 6OZ KIT known as EA 9321 PART B 6OZ SEMKIT
---
LOCTITE EA 9394.2 AERO PART A 200ML
---
LOCTITE EA 9396 AERO PART B 4OZ known as EA 9396 PART B 4 OZ
---
LOCTITE EA 934NA AERO PART A 100GR KIT known as EA 934NA PART A 100GPUDD INGCUP
---
LOCTITE EA 9394.2 AERO PART B 100GR KIT known as EA 9394.2 PART B 100G E -Z PAK
---
LOCTITE EA 9394 AERO PART A 50GR KIT known as EA 9394 PART A 50G PUD.CUP
---
LOCTITE EA 960F AERO PART B 50GR KIT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. For the Part A plus Part B adhesive mixture, follow curing schedule as recommended in product literature. Do not take internally. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
May occur.
Keep away from heat, ignition sources and incompatible materials.
This product may react with strong acids or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Tetraglycidyl diaminodiphenylmethane, Bisphenol-A Epichlorhydrin resin)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK?
The signal word is warning.
What is the physical form of LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK?
LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK is a liquid with black color. It has mild odor.
What is the solubility of LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK?
Negligible
What is LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK used for?
Part A of 2-K-Epoxy Adhesive
What are the hazard statements for LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK?
This substance has 3 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK?
The melting point is Not determined and the boiling point is Not determined.