Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 9321 AERO PART B 6OZ KIT known as EA 9321 PART B 6OZ SEMKIT
- Product Code
- 1062565, AB9362313
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive for the Aerospace Industry
Manufacturers & Suppliers
Henkel
manufacturer
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, C18 unsaturated, dimers, polymers with tall oil fatty acids and triethylenetetramine | 68082-29-1 | 30 - 60% | Yes |
| Aluminium oxide - non fibrous form | 1344-28-1 | 10 - 30% | Yes |
| Diethylenetriamine | 111-40-0 | 5 - 10% | Yes |
| Silica, amorphous, fumed, cryst.-free | 112945-52-5 | 1 - 5% | Yes |
| Amines, polyethylenepoly-, triethylenetetramine fraction | 90640-67-8 | 1 - 5% | Yes |
| N-(3-(Trimethoxysilyl)propyl)ethylenediamine | 1760-24-3 | 1 - 5% | Yes |
Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Remove contaminated clothing and footwear. Wash affected area immediately with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. If symptoms develop and persist, get medical attention.
Immediate Medical Attention
Seek immediate medical attention for eye contact.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage. Do not allow product to enter sewer or waterways.
Scrape up spilled material and place in a closed container for disposal.
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9321 AERO PART B 20GR KIT
---
LOCTITE EA 9321 AERO PART A 20GR KIT
---
LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK
---
LOCTITE EA 9321 AERO PART A 25GR KIT known as EA 9321 PART A 25G E-Z PAK
---
LOCTITE EA 9396 AERO PART B 4OZ known as EA 9396 PART B 4 OZ
---
LOCTITE EA 960F AERO PART B 50GR KIT
---
LOCTITE EA 9364FR AERO PART B 50ML KIT known as EA 9364FR PT B 50ml SEMP AK
---
LOCTITE EA 9394.2 AERO PART B 100GR KIT known as EA 9394.2 PART B 100G E -Z PAK
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Follow curing schedule as recommended in product literature. Do not heat Part B at temperatures greater than 100 °C (212 °F). This material may self-react at higher temperatures and cause an exotherm. Do not cut, grind, weld, or drill on or near this container. Empty containers retain product residue, so obey hazard warnings and handle empty containers as if they were full.
Store between 0 °C (32°F) and 25 °C (77°F). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
May occur.
Avoid mixing resin (Part A) and curing agent (Part B) unless you plan to use immediately. Do not heat mixed adhesive unless curing surfaces to be bonded. Failure to observe these precautions may result in excessive heat build-up causing an exotherm.
Keep away from strong oxidizing agents, strong Lewis or mineral acids.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3259
- Shipping Name
- Amines, solid, corrosive, n.o.s. (Diethylenetriamine, Triethylenetetramine)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 9321 AERO PART B 6OZ KIT known as EA 9321 PART B 6OZ SEMKIT?
The signal word is danger.
What is the physical form of LOCTITE EA 9321 AERO PART B 6OZ KIT known as EA 9321 PART B 6OZ SEMKIT?
LOCTITE EA 9321 AERO PART B 6OZ KIT known as EA 9321 PART B 6OZ SEMKIT is a solid with amber color. It has ammonia odor.
What is LOCTITE EA 9321 AERO PART B 6OZ KIT known as EA 9321 PART B 6OZ SEMKIT used for?
Adhesive for the Aerospace Industry
What are the hazard statements for LOCTITE EA 9321 AERO PART B 6OZ KIT known as EA 9321 PART B 6OZ SEMKIT?
This substance has 4 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H331: TOXIC IF INHALED.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
What is the melting point of LOCTITE EA 9321 AERO PART B 6OZ KIT known as EA 9321 PART B 6OZ SEMKIT?
The melting point is < -40 °C (< -40°F) and the boiling point is > 200 °C (> 392°F).