Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 9364FR AERO PART B 50ML KIT known as EA 9364FR PT B 50ml SEMP AK
- Product Code
- AB9373329
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Part B of 2-Component Epoxy Adhesive.
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, C18 unsaturated, dimers, polymers with tall oil fatty acids and triethylenetetramine | 68082-29-1 | 30 - 60% | Yes |
| N,N'-Bis(3-aminopropyl)piperazine | 7209-38-3 | 10 - 30% | Yes |
| Amines, polyethylenepoly-, triethylenetetramine fraction | 90640-67-8 | 1 - 5% | Yes |
| 3,6-diazaoctanethylenediamine | 112-24-3 | 0.1 - 1% | Yes |
| N-Aminoethylpiperazine | 140-31-8 | 0.1 - 1% | Yes |
| Melamine | 108-78-1 | 0.1 - 1% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, immediately remove the affected person to fresh air. If symptoms develop and persist, get medical attention.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get immediate medical attention. Do not induce vomiting.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
LOCTITE EA 9380 AERO PART A 400ML KIT known as EA 9380 PART A 400ML SEMP AK
---
LOCTITE EA 9321 AERO PART B 6OZ KIT known as EA 9321 PART B 6OZ SEMKIT
---
LOCTITE EA 960F AERO PART B 50GR KIT
---
LOCTITE EA 9359.3 AERO PART A 50ML
---
LOCTITE EA 9394.2 AERO PART A 200ML
---
LOCTITE EA 9396 AERO PART B 4OZ known as EA 9396 PART B 4 OZ
---
LOCTITE EA 9396C-2 AERO PART A 50GR KIT known as EA 9396/C2 PART A 50G P UD CUP
---
LOCTITE EA 9394 AERO PART A 50GR KIT known as EA 9394 PART A 50G PUD.CUP
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Wash thoroughly after handling. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
Keep away from strong oxidizing agents, strong Lewis or mineral acids.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2735
- Shipping Name
- Amines, liquid, corrosive, n.o.s. (Bis(aminopropyl)piperazine, Triethylenetetramine)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 9364FR AERO PART B 50ML KIT known as EA 9364FR PT B 50ml SEMP AK?
The signal word is danger.
What is the physical form of LOCTITE EA 9364FR AERO PART B 50ML KIT known as EA 9364FR PT B 50ml SEMP AK?
LOCTITE EA 9364FR AERO PART B 50ML KIT known as EA 9364FR PT B 50ml SEMP AK is a liquid with straw color. It has amine odor.
What is the solubility of LOCTITE EA 9364FR AERO PART B 50ML KIT known as EA 9364FR PT B 50ml SEMP AK?
Insoluble
What is LOCTITE EA 9364FR AERO PART B 50ML KIT known as EA 9364FR PT B 50ml SEMP AK used for?
Part B of 2-Component Epoxy Adhesive.
What are the hazard statements for LOCTITE EA 9364FR AERO PART B 50ML KIT known as EA 9364FR PT B 50ml SEMP AK?
This substance has 3 hazard statements:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE EA 9364FR AERO PART B 50ML KIT known as EA 9364FR PT B 50ml SEMP AK?
The melting point is Not applicable and the boiling point is Not applicable.