Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP 193R GRAPHITE LUBRICANT ACHESON known as DAG 193R
- Product Code
- 1758655
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mica | 12001-26-2 | 1 - 5% | Yes |
| Quartz (SiO2) | 14808-60-7 | 0.1 - 1% | Yes |
IDH number: 1758655 Product name: BONDERITE L-GP 193R GRAPHITE LUBRICANT ACHESON known as DAG 193R
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up as much material as possible. Store in a partly filled, closed container until disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R
---
BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT
---
BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON
---
BONDERITE L-FG 137 EU GRAPHITE LUBRICANT ACHESON known as DAG 137 EU
---
BONDERITE L-GP GC-4A GRAPHITE LUBRICANT ACHESON
---
BONDERITE L-CA 193 CASTING LUBRICANT ACHESON known as DAG193
---
BONDERITE L-GP GP 460 GRAPHITE LUBRICANT ACHESON known as ACHESON GP460
---
BONDERITE L-FG GP 101 GRAPHITE FORGING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only with adequate ventilation. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.
Not available.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Elevated temperatures. Freezing conditions.
Acids.
Thermal decomposition can lead to release of irritating gases and vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-GP 193R GRAPHITE LUBRICANT ACHESON known as DAG 193R?
The signal word is danger.
What is the physical form of BONDERITE L-GP 193R GRAPHITE LUBRICANT ACHESON known as DAG 193R?
BONDERITE L-GP 193R GRAPHITE LUBRICANT ACHESON known as DAG 193R is a liquid with brown color. It has odorless odor.
What is BONDERITE L-GP 193R GRAPHITE LUBRICANT ACHESON known as DAG 193R used for?
Lubricant
What are the hazard statements for BONDERITE L-GP 193R GRAPHITE LUBRICANT ACHESON known as DAG 193R?
This substance has 1 hazard statement:
- H350: MAY CAUSE CANCER.
What is the melting point of BONDERITE L-GP 193R GRAPHITE LUBRICANT ACHESON known as DAG 193R?
The melting point is <= 0 °C (<= 32°F) and the boiling point is Not determined.