Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R
- Product Code
- 1758627
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dry film lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Diboron trioxide | 1303-86-2 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Get immediate medical attention. Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Non-combustible. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-GP GP 460 GRAPHITE LUBRICANT ACHESON known as ACHESON GP460
---
BONDERITE L-FG 855 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417M GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-GP 154N ACHESON GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG 154N
---
BONDERITE L-GP 741 GREASE ACHESON
---
BONDERITE L-FG 182 GRAPHITE FORGING LUBRICANT ACHESON known as DELTAFO RGE182
---
BONDERITE L-GP 156 GRAPHITE DISPERSION IN SOLVENT ACHESON known as DAG156
---
BONDERITE L-FG 1105 SYNTHETIC FORGING LUBRICANT ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only.
For safe storage, store between 5 °C (41°F) and 30 °C (86°F) Keep out of reach of children and away from food and drink.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Elevated temperatures. Freezing conditions.
Acids.
Irritating and toxic gases or fumes may be released during a fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R?
The signal word is warning.
What is the physical form of BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R?
BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R is a liquid with white color. It has mild odor.
What is the solubility of BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R?
Disperses in water as a suspension
What is BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R used for?
Dry film lubricant
What are the hazard statements for BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R?
This substance has 1 hazard statement:
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R?
The melting point is <= 0 °C (<= 32°F) and the boiling point is >= 100 °C (>= 212°F).