NextSDS Logo
Safety Data Sheet EN

BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT
Synonyms
DAG 154

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2 H225
Eye Irrit. Cat. 2A H319
STOT SE Cat. 3 H336

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 HIGHLY FLAMMABLE LIQUID AND VAPOUR.
H319 CAUSES SERIOUS EYE IRRITATION.
H336 MAY CAUSE DROWSINESS OR DIZZINESS.

Precautionary Statements

P210 Keep away from heat, sparks, open flames, hot surfaces - no smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Avoid breathing mist/vapours.
P264 Wash affected area thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves, clothing, eye and face protection.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical attention.
P370 + P378 In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
2-Propanol 67-63-0 60 - 80% Yes
n-Butyl alcohol 71-36-3 1 - 5% Yes
1-methoxy-2-propanol 107-98-2 1 - 5% Yes
Graphite 7782-42-5 10 - 30% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

Skin contact

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Wash clothing before reuse. Get medical attention.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.

Immediate Medical Attention

Not available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up as much material as possible. Wash spillage site thoroughly with soap and water or detergent solution.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Use only with adequate ventilation. Avoid breathing vapors or mists of this product. Remove all sources of ignition. For industrial use only.

Storage

Store in a cool, dry, well-ventilated area. Keep container closed. Store in original container until ready to use. Protect from direct sunlight.

Hygiene

Wash thoroughly after handling. Keep out of reach of children and away from food and drink.

Fire prevention

Remove all sources of ignition. Ground and bond all equipment as required (when transferring products).

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Black
Colour Intensity
---
Form
---
Odor
Alcohol
Odor Threshold
7.5 ppm
Ph
Product is non-soluble (in water). Not applicable
Melting Point
Not applicable, Product is a liquid
Boiling Point
> 82 °C (> 179.6 °F)
Flash Point
11.6 °C (52.88 °F) Tagliabue closed cup
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
2.9 (Butyl acetate = 1)
Vapor Pressure
42 mbar (20 °C (68°F)) 240 mbar (50 °C (122°F))
Vapor Density
---
Relative Density
0.89
Bulk Density
---
Density
---
Flammability
Not applicable
Upper Explosive Limit
12 %
Lower Explosive Limit
2 %
Explosive Limits
---
Auto Ignition Temperature
398.8 °C (749.84 °F)
Decomposition Temperature
Not available.
Solubility
Disperses in water as a suspension
Partition Coefficient
Not available.
Solubility In Water
Miscible Water
Solubility In Fat
---
Molecular Weight
---
Voc Content
710 g/l (calculated)
Metal Corrosion
---
Dynamic Viscosity
200 - 800 cp
Kinematic Viscosity
> 20.5 mm2/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials. Oxidizing conditions.

Incompatible

Strong oxidizing agents. Strong acids. Aldehydes.

Decomposition

Upon decomposition, this product may yield gaseous nitrogen oxides, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1263
Shipping Name
Paint
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT known by?

BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT is also known as: DAG 154

What is the hazard signal word for BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT?

The signal word is danger.

What is the physical form of BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT?

BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT is a liquid with black color. It has alcohol odor.

What is the solubility of BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT?

Disperses in water as a suspension

What is BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT used for?

Lubricant

What are the hazard statements for BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT?

This substance has 3 hazard statements:

  • H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H336: MAY CAUSE DROWSINESS OR DIZZINESS.

What is the melting point of BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT?

The melting point is Not applicable, Product is a liquid and the boiling point is > 82 °C (> 179.6 °F).