Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON
- Synonyms
- JL44002
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coating
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention.
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Immediate medical treatment necessary. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Immediate medical treatment necessary.
Medical Treatment
This material, if aspirated into the lungs, may cause chemical pneumonitis; treat the affected person appropriately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, extinguishing powder, carbon dioxide. In case of fire, keep containers cool with water spray.
Not available.
Vapours may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back. Vapors may form explosive mixtures with air.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-GP GC-4A GRAPHITE LUBRICANT ACHESON
---
BONDERITE L-GP 154 ACHESON GRAPHITE LUBRICANT
---
BONDERITE L-FG 4258 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG GP 101 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG 855 GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-FG F 417M GRAPHITE FORGING LUBRICANT ACHESON
---
BONDERITE L-GP 634R GRAPHITE LUBRICANT ACHESON known as DAG 634R
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Wash thoroughly after handling. Do not take internally. Keep away from heat, spark and flame. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers.
Store between 20.0 °C (68°F) and 25.0 °C (77°F). Store in original container until ready to use. Keep the container tightly closed and in a cool, well-ventilated place. Do not handle or store near an open flame, heat or other sources of ignition.
Wash thoroughly after handling.
Keep away from heat, spark and flame. Ground and bond all equipment as required (when transferring products).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition.
Reaction with strong acids. Reaction with strong bases This product may react with oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1193
- Shipping Name
- Ethyl methyl ketone solution
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON known by?
BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON is also known as: JL44002
What is the hazard signal word for BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON?
The signal word is danger.
What is the physical form of BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON?
BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON is a liquid with black color. It has pungent, sweet odor.
What is the solubility of BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON?
Partially soluble Water
What is BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON used for?
Coating
What are the hazard statements for BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON?
This substance has 4 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
What is the melting point of BONDERITE L-GP JL 44002 GRAPHITE LUBRICANT ACHESON?
The melting point is -86.7 °C (-124.1 °F) and the boiling point is 78 °C (172.4 °F).