NextSDS Logo
Safety Data Sheet EN

TEROSON AL 7163 LIQUID APPLIED SOUND DEADENER

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TEROSON AL 7163 LIQUID APPLIED SOUND DEADENER
Product Code
2556091

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Acrylics

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2A H319
Carc. Cat. 1A H350

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H319 CAUSES SERIOUS EYE IRRITATION.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, clothing, eye and face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P337 + P313 If eye irritation persists: Get medical attention.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

Chemical Name CAS Number Concentration Hazardous
Limestone 1317-65-3 30 - 60% Yes
Wollastonite (Ca(SiO3)) 13983-17-0 5 - 10% Yes
Graphite 7782-42-5 5 - 10% Yes
Potato starch 9005-25-8 1 - 5% Yes
2-Dimethylaminoethanol 108-01-0 0.1 - 1% Yes
Quartz (SiO2) respirable particulates (RCS) >=10% 14808-60-7 0.1 - 1% Yes
Quartz (SiO2) 14808-60-7 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Immediately wash skin thoroughly with soap and water. Obtain medical attention if irritation persists.

Eye contact

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

Ingestion

Get immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Get immediate medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

In case of fire toxic gases can be released.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

isolate the hazard area and deny entry to unnecessary and unprotected personnel

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing fumes if this product is used at high temperatures. Use only with adequate ventilation. Do not take internally. For industrial use only.

Storage

Store between 10 °C (50°F) and 30 °C (86°F). Keep away from heat and direct sunlight. Do not freeze. Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.

Hygiene

Wash thoroughly after handling.

Fire prevention

Keep away from heat.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Dynamic Viscosity
50,000 - 90,000 mPa.s
Flammability
Not applicable
Density
1.57
Physical State Data
liquid
Solubility In Water
---
Voc Content
< 0.2 lb/gal
Solubility In Fat
---
Partition Coefficient
Not available.
Colour Intensity
---
Boiling Point
> 104 °C (> 219.2 °F) calculated
Solubility
Dispersible Water
Vapor Pressure
Not available.
Evaporation Rate
Not available.
Decomposition Temperature
Not available.
Odor
Mild
Melting Point
Not available.
Ph
Not available.
Crystallisation Point
---
Physical State
Liquid
Cloud Point
---
Kinematic Viscosity
Not available.
Solidification Point
---
Odor Threshold
Not available.
Softening Point
---
Relative Evaporation Rate
---
Lower Explosive Limit
Not available.
Freezing Point
---
Vapor Density
---
Flash Point
> 104 °C (> 219.2 °F) calculated
Upper Explosive Limit
Not available.
Properties Status
---
Form
---
Bulk Density
---
Appearance
---
Colour
Black
Auto Ignition Temperature
Not available.
Explosive Limits
---
Relative Density
---
State Under Standard Conditions
---
Molecular Weight
---
Metal Corrosion
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Nitrites may react with organic amines to form nitrosamines which can cause cancer.

Hazardous reactions

Will not occur.

Avoid

Protect from direct sunlight. Direct sources of heat. Freezing conditions.

Incompatible

Do not mix this product with fluids which contain NITRITES/NITRATES. NITROSAMINE may be formed.

Decomposition

Irritating and/or toxic fumes and gases may be emitted upon the product's decomposition.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TEROSON AL 7163 LIQUID APPLIED SOUND DEADENER?

The signal word is danger.

What is the physical form of TEROSON AL 7163 LIQUID APPLIED SOUND DEADENER?

TEROSON AL 7163 LIQUID APPLIED SOUND DEADENER is a liquid with black color. It has mild odor.

What is the solubility of TEROSON AL 7163 LIQUID APPLIED SOUND DEADENER?

Dispersible Water

What is TEROSON AL 7163 LIQUID APPLIED SOUND DEADENER used for?

Acrylics

What are the hazard statements for TEROSON AL 7163 LIQUID APPLIED SOUND DEADENER?

This substance has 2 hazard statements:

  • H319: CAUSES SERIOUS EYE IRRITATION.
  • H350: MAY CAUSE CANCER.

What is the melting point of TEROSON AL 7163 LIQUID APPLIED SOUND DEADENER?

The melting point is Not available. and the boiling point is > 104 °C (> 219.2 °F) calculated.