Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE AA 3081 MEDICAL GRADE ADHESIVE known as LOCTITE 3081 LCA COV 15LTR PA E
- Product Code
- 1442118
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Ultraviolet adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Isobornyl acrylate | 5888-33-5 | 60 - 80% | Yes |
| Polyethylene glycol diacrylate | 26570-48-9 | 5 - 10% | Yes |
| Acrylic acid | 79-10-7 | 1 - 5% | Yes |
| Isobornyl methacrylate | 7534-94-3 | 1 - 5% | Yes |
| Gamma-glycidoxypropyl trimethoxysilane | 2530-83-8 | 1 - 5% | Yes |
| Hydroxyalkyl methacrylate | 27813-02-1 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Water may be unsuitable as an extinguishing media, but may be helpful in keeping adjacent containers cool.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material. Scrape up as much material as possible.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
LOCTITE AA 3381 LIGHT CURE MED. DEV. ADH. known as 3381 Light Cure Adhesive Medic
---
LOCTITE AA 3108 LIGHT CURING ADHESIVE known as LOCTITE® 3108™ LIGHT CURE ADHE
---
LOCTITE AA 5810A CQ300ML
---
LOCTITE AA 330
---
LOCTITE AA 3926 LC
---
LOCTITE AA 3554 1L EN/CH
---
LOCTITE AA 3504 LC known as Loctite 3504
---
LOCTITE AA 3974 LIGHT CURE ADHESIVE known as LOCTITE® 3974™ LIGHT CURE ADHE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist.
Store at or below 38 °C (100.4 °F). Keep in a cool, well ventilated area. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Hazardous polymerization can occur.
Heat, flames, sparks and other sources of ignition. Store away from incompatible materials. Ultraviolet radiation. Direct sunlight. Freezing conditions. Moisture.
Strong oxidizing agents. Strong reducing agents. Free radical initiators. Strong acids and strong bases. Other polymerization initiators. Water. Humid air.
Oxides of carbon. Oxides of nitrogen. Oxides of silicon. Irritating organic vapours. Isocyanates. Amines. Hydrogen cyanide. Formaldehyde
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (Isobornyl acrylate)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE AA 3081 MEDICAL GRADE ADHESIVE known as LOCTITE 3081 LCA COV 15LTR PA E?
The signal word is danger.
What is the physical form of LOCTITE AA 3081 MEDICAL GRADE ADHESIVE known as LOCTITE 3081 LCA COV 15LTR PA E?
LOCTITE AA 3081 MEDICAL GRADE ADHESIVE known as LOCTITE 3081 LCA COV 15LTR PA E is a liquid appearing as clear, cloudy with clear, cloudy color. It has sharp odor.
What is the solubility of LOCTITE AA 3081 MEDICAL GRADE ADHESIVE known as LOCTITE 3081 LCA COV 15LTR PA E?
Slight Water; Not determined Acetone
What is LOCTITE AA 3081 MEDICAL GRADE ADHESIVE known as LOCTITE 3081 LCA COV 15LTR PA E used for?
Ultraviolet adhesive
What are the hazard statements for LOCTITE AA 3081 MEDICAL GRADE ADHESIVE known as LOCTITE 3081 LCA COV 15LTR PA E?
This substance has 4 hazard statements:
- H227: COMBUSTIBLE LIQUID.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
What is the melting point of LOCTITE AA 3081 MEDICAL GRADE ADHESIVE known as LOCTITE 3081 LCA COV 15LTR PA E?
The melting point is Not applicable, Product is a liquid and the boiling point is > 140 °C (> 284°F).