Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE SI 596 RD 55 GAL
- Product Code
- 2103850
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Silicon dioxide | 7631-86-9 | 5 - 10% | Yes |
| Diiron trioxide | 1309-37-1 | 1 - 5% | Yes |
| Silane, dichlorodimethyl-, reaction products with silica | 68611-44-9 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. If symptoms develop and persist, get medical attention.
Wipe off paste with paper towel or cloth. Wash with soap and water. If skin irritation persists, call a physician.
Symptoms: skin irritation
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a specialist.
Symptoms: eye irritation
Do not induce vomiting. If a person feels unwell or symptoms of skin irritation appear, consult a physician.
Symptoms: feels unwell
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, dry chemical or carbon dioxide.
Not available.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Maintain good ventilation for large spills.
Do not allow product to enter sewer or waterways.
Store in a partly filled, closed container until disposal. Spilled material will solidify. Scrape up as much material as possible.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling.
Keep container closed. Store in a dry area below 90° F.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Exposure to moisture. Prolonged heating at temperatures above 150 °C.
Acids. Water Bases. Oxidizing agents.
Acetic acid is liberated slowly upon contact with moisture. Formaldehyde Irritating vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE SI 596 RD 55 GAL?
The signal word is warning.
What is the physical form of LOCTITE SI 596 RD 55 GAL?
LOCTITE SI 596 RD 55 GAL is a liquid, paste with red color. It has acetic acid odor.
What is the solubility of LOCTITE SI 596 RD 55 GAL?
Not soluble. Polymerizes in presence of water. Water; Not determined Acetone
What are the hazard statements for LOCTITE SI 596 RD 55 GAL?
This substance has 2 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of LOCTITE SI 596 RD 55 GAL?
The melting point is Not available. and the boiling point is Not available..