Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE EA 0151 B HARDENER known as LOCTITE 0151 3.3oz KIT PTB
- Product Code
- 702160
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Epoxy Hardener
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, C18-unsatd., dimers, oligomeric reaction products with tall-oil fatty acids and triethylenetetramine | 68082-29-1 | 60 - 80% | Yes |
| 3,6-diazooctanethylenediamine | 112-24-3 | 10 - 30% | Yes |
| 1,2-Ethanediamine, N1,N1-bis(2-aminoethyl)- | 4097-89-6 | 1 - 5% | Yes |
| 2-(2-aminoethylamino)ethanol | 111-41-1 | 0.1 - 1% | Yes |
| N-Aminoethylpiperazine | 140-31-8 | 0.1 - 1% | Yes |
| Tetraethylene pentamine | 112-57-2 | 0.1 - 1% | Yes |
| Diethylenetriamine | 111-40-0 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Remove contaminated clothing and shoes. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.
Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Seek medical attention immediately for eye contact and ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear. Keep unnecessary personnel away. In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up as much material as possible.
Materials: sand, silica gel, acid binder, universal binder, sawdust
Related Products
Similar products with comparable safety profiles
LOCTITE EA E-30CL B HARDENER
---
LOCTITE AA H3151 B HARDENER known as SPEEDBONDER H3151 400 ML PART B
---
LOCTITE EA 3324B EPOXY 2K HARDENER known as Loctite E3324 B_0,56Kg Stick
---
LOCTITE EA 193559/60 B known as LOCTITE 193559/60 50G PT B
---
LOCTITE EA 9153 TWO-PART EPOXY known as LOCTITE LW BNDG CMPD 2OZ EN
---
LOCTITE AA 330 KIT PART B
---
LOCTITE EA 960F AERO PART B 50GR KIT
---
LOCTITE EA 9321 AERO PART B 20GR KIT
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Use only with adequate ventilation. Keep container closed.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Keep away from heat, spark and flame. Store in original container until ready to use.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing. Polymerization is a highly exothermic reaction and may generate sufficient heat to cause thermal decomposition and/or rupture containers.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight. Avoid temperatures above 38°C (100°F). Excessive heat. Avoid mixing resin (Part A) and curing agent (Part B) unless you plan to use immediately. Failure to observe these precautions may result in excessive heat build-up causing an exotherm.
Oxidizing agents. Acids and bases. Water. Amines. Acrylates. Alcohols. Nitrites. Copper. Copper alloys.
Oxides of carbon. Oxides of nitrogen. Toxic fumes. Irritating vapors. Hydrocarbons Amines. Ammonia.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2259
- Shipping Name
- Triethylenetetramine solution
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE EA 0151 B HARDENER known as LOCTITE 0151 3.3oz KIT PTB?
The signal word is danger.
What is the physical form of LOCTITE EA 0151 B HARDENER known as LOCTITE 0151 3.3oz KIT PTB?
LOCTITE EA 0151 B HARDENER known as LOCTITE 0151 3.3oz KIT PTB is a paste appearing as translucent, amber with translucent, amber color. It has ammoniacal odor.
What is the solubility of LOCTITE EA 0151 B HARDENER known as LOCTITE 0151 3.3oz KIT PTB?
Not miscible or difficult to mix Water; Partially soluble alcohols, glycolether and aromatic hydrocarbones.
What is LOCTITE EA 0151 B HARDENER known as LOCTITE 0151 3.3oz KIT PTB used for?
Epoxy Hardener
What are the hazard statements for LOCTITE EA 0151 B HARDENER known as LOCTITE 0151 3.3oz KIT PTB?
This substance has 5 hazard statements:
- H302 + H312: HARMFUL IF SWALLOWED OR IN CONTACT WITH SKIN.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE EA 0151 B HARDENER known as LOCTITE 0151 3.3oz KIT PTB?
The melting point is Not applicable, Product is a liquid and the boiling point is 270 °C (518°F)260 °C (500°F)None.