Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-NT 41042 CLEANER / COATER
- Product Code
- 2403605
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for the conversion treatment of metals
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hexafluorozirconic acid | 12021-95-3 | 0.1 - 1% | Yes |
| Nitric acid | 7697-37-2 | 0.1 - 1% | Yes |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately flush with large quantities of water for at least 15 minutes. Remove contaminated clothing.
Rinse immediately with plenty of water for 15 minutes.
Do not induce vomiting. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid.
Immediate Medical Attention
GET MEDICAL ATTENTION. Seek immediate medical attention. Get immediate medical attention.
Medical Treatment
Ocular exposure to corrosive fluoride compounds has been treated with isotonic sodium chloride or magnesium chloride. Dermal exposure to corrosive fluoride compounds has been treated with calcium gluconate or calcium carbonate gel applied topically to the affected areas to relieve pain at the site of exposure. Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
Formation of toxic gases is possible during heating or in fires.
Wear self contained breathing apparatus. Wear protective equipment.
Firefighter Protection
Wear self contained breathing apparatus. Wear protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate protective equipment and clothing during clean-up. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE M-NT 41042 CONVERSION COATING
---
BONDERITE M-NT 404 CONVERSION COATING
---
BONDERITE M-NT 404 CONVERSION COATING
---
BONDERITE M-NT 8453 CONVERSION COATING
---
BONDERITE M-NT 1455T CONVERSION COATING
---
BONDERITE C-MC 21130 MAINTENANCE CLEANER
---
BONDERITE C-AK 412-C Cleaner
---
BONDERITE M-NT 770X R N CONVERSION COATING
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid breathing vapors or mists of this product. Avoid contact with eyes, skin and clothing. Wear protective equipment. Wash thoroughly after handling. Do not take internally. For industrial use only.
For safe storage, store between -20 °C (-4°F) and 50 °C (122°F). Thaw and mix thoroughly if frozen. Ship and store above 40°F.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
May react with strong bases or oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3264
- Shipping Name
- Corrosive liquid, acidic, inorganic, n.o.s. (Hexafluoro zirconic acid, Nitric acid)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-NT 41042 CLEANER / COATER?
The signal word is danger.
What is the physical form of BONDERITE M-NT 41042 CLEANER / COATER?
BONDERITE M-NT 41042 CLEANER / COATER is a liquid with colourless / colorless to light yellow color. It has characteristic odor.
What is the solubility of BONDERITE M-NT 41042 CLEANER / COATER?
Complete Water
What is BONDERITE M-NT 41042 CLEANER / COATER used for?
Product for the conversion treatment of metals
What are the hazard statements for BONDERITE M-NT 41042 CLEANER / COATER?
This substance has 1 hazard statement:
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE M-NT 41042 CLEANER / COATER?
The melting point is Not available. and the boiling point is > 100 °C (> 212°F)calculated.