LOCTITE DURO-TAK 5542

Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Get medical attention.

Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention.

Check for and remove any contact lenses. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

If material is ingested, immediately contact a physician or poison control center. DO NOT induce vomiting unless directed to do so by medical personnel. If vomiting occurs, prevent aspiration by keeping the patient's head below the knees. Never give anything by mouth to an unconscious person.

Use extinguishing measures appropriate to local circumstances and the surrounding environment. Water spray (fog), foam, dry chemical or carbon dioxide.

Vapors may accumulate in low or confined areas, travel considerable distance to source of ignition, and flash back. Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Isolate area. Keep unnecessary personnel away.

Isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Prevent further leakage or spillage if safe to do so. Do not allow material to contaminate ground water system.

Isolate area. Keep unnecessary personnel away. Eliminate all ignition sources (flames, hot surfaces, and sources of electrical, static or frictional sparks). Dike and contain spill with inert material (e.g. sand, earth). Transfer liquids to covered metal containers for recovery or disposal, or remove with inert absorbent. Use only non-sparking tools. Place absorbent diking materials in covered metal containers for disposal. Prevent contamination of sewers, streams and groundwater with spilled material or used absorbent.

Materials: inert absorbent

Make sure containers are properly grounded before use or transfer of material. Keep container closed. Do not breathe gas/fumes/vapor/spray. Use only with adequate ventilation. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Do not taste or swallow. Do not handle or store near an open flame, heat or other sources of ignition. 'Empty' containers retain product residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition; they may explode.

Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Wash thoroughly after handling.

Do not handle or store near an open flame, heat or other sources of ignition. Ground and bond metal containers for liquid transfer to avoid static sparks.

Stable under recommended storage conditions.

This product may react with strong acids, bases and oxidizing agents.

None expected.

Heat, flames, sparks and other sources of ignition. Take measures to prevent the build-up of electrostatic charges.

Strong acids, alkalies and oxidizing agents.

Irritating and toxic gases or fumes may be released during a fire. Oxides of carbon.