Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Loctite Power Grab Ultimate Crystal Clear Adhesive
- Product Code
- 2578763
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Assembly adhesive, reaction
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelina.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Trimethoxyvinylsilane | 2768-02-7 | 1 - 5% | Yes |
| Bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate | 52829-07-9 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Wash with soap and water. If skin irritation persists, call a physician. Wipe off paste with paper towel or cloth.
Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time. If symptoms develop and persist, get medical attention.
Do not induce vomiting. If a person feels unwell or symptoms of skin irritation appear, consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, powder, water spray jet, fine water spray
Not available.
None identified.
Wear protective equipment. Wear self-contained breathing apparatus.
Firefighter Protection
Wear protective equipment. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Maintain good ventilation for large spills.
Do not allow product to enter sewer or waterways.
Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Store in a partly filled, closed container until disposal. Spilled material will solidify. Scrape up as much material as possible.
Materials: partly filled, closed container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not wear contact lenses. Avoid contact with eyes, skin and clothing. Keep out of the reach of children. Protect from moisture. Use only with adequate ventilation.
Store in a cool, dry area. Avoid moisture. Store between 5 °C (41°F) and 25 °C (77°F). Outside temperature limits, the product will be irreversibly damaged and no longer usable.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
Will not occur.
Exposure to moisture.
Oxidizing agents.
Methanol is liberated slowly upon exposure to moisture.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Loctite Power Grab Ultimate Crystal Clear Adhesive?
The signal word is warning.
What is the physical form of Loctite Power Grab Ultimate Crystal Clear Adhesive?
Loctite Power Grab Ultimate Crystal Clear Adhesive is a solidsolid with transparent color. It has alcohol odor.
What is the solubility of Loctite Power Grab Ultimate Crystal Clear Adhesive?
Insoluble Water
What is Loctite Power Grab Ultimate Crystal Clear Adhesive used for?
Assembly adhesive, reaction
What are the hazard statements for Loctite Power Grab Ultimate Crystal Clear Adhesive?
This substance has 2 hazard statements:
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of Loctite Power Grab Ultimate Crystal Clear Adhesive?
The melting point is < -50 °C (< -58°F) and the boiling point is 310 °C (590°F).