Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-FN 310A FUNCTIONAL PREVENTIVE COATING ACHESON known as Emralon 310A 3.8 KG
- Product Code
- 1794630
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyoxyethylene trimethylnonyl ether | 60828-78-6 | 1 - 5% | Yes |
| Ethene, tetrafluoro-, homopolymer | 9002-84-0 | 60 - 80% | Yes |
IDH number: 1794630 Product name: BONDERITE S-FN 310A FUNCTIONAL PREVENTIVE COATING ACHESON known as Emralon 310A 3.8 KG
Notes
Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately wash skin thoroughly with soap and water. If symptoms develop and persist, get medical attention.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Seek medical attention if symptoms develop or persist (inhalation); get medical attention (skin); Seek medical attention at once (eye); Get medical attention (ingestion).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Surfaces may become slippery after spillage. Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Absorb spill with inert material. Shovel material into appropriate container for disposal. Wash spillage site thoroughly with soap and water or detergent solution.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON330
---
BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON 330 3.628 KG *RWE
---
BONDERITE S-OT 310B FUNCTIONAL COATING ACHESON
---
BONDERITE S-FN 309 DRYFILM COATING ACHESON known as EMRALON309
---
BONDERITE S-FN 329 DRYFILM COATING ACHESON known as EMRALON329
---
BONDERITE S-FN EB-815 CONDUCTIVE COATING ACHESON known as DAG EB-815 5KG
---
BONDERITE S-FN 860 FUNCTIONAL PREVENTIVE COATING ACHESON known as COPPE RSHIELD 860
---
BONDERITE S-FN EV 605CC CONDUCTIVE COATING PA18KG ACHESON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Use only with adequate ventilation. Do not take internally. For industrial use only.
Store in a cool, dry, well-ventilated area. Keep away from heat, spark and flame. Protect from freezing.
Wash thoroughly after handling.
Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Excessive heat. Freezing conditions.
This product may react with oxidizing agents. Powdered metals. Acids.
In case of fire toxic gases can be released. Hydrogen fluoride Carbonyl fluoride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-FN 310A FUNCTIONAL PREVENTIVE COATING ACHESON known as Emralon 310A 3.8 KG?
The signal word is danger.
What is the physical form of BONDERITE S-FN 310A FUNCTIONAL PREVENTIVE COATING ACHESON known as Emralon 310A 3.8 KG?
BONDERITE S-FN 310A FUNCTIONAL PREVENTIVE COATING ACHESON known as Emralon 310A 3.8 KG is a liquid with white color. It has slight odor.
What is the solubility of BONDERITE S-FN 310A FUNCTIONAL PREVENTIVE COATING ACHESON known as Emralon 310A 3.8 KG?
Disperses in water as a suspension Water
What is BONDERITE S-FN 310A FUNCTIONAL PREVENTIVE COATING ACHESON known as Emralon 310A 3.8 KG used for?
Lubricant
What are the hazard statements for BONDERITE S-FN 310A FUNCTIONAL PREVENTIVE COATING ACHESON known as Emralon 310A 3.8 KG?
This substance has 1 hazard statement:
- H318: CAUSES SERIOUS EYE DAMAGE.
What is the melting point of BONDERITE S-FN 310A FUNCTIONAL PREVENTIVE COATING ACHESON known as Emralon 310A 3.8 KG?
The melting point is <= 0 °C (<= 32°F) and the boiling point is 100 °C (212°F)no method / method unknown.