Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON330
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dry film lubricant
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| n-Butyl alcohol | 71-36-3 | 10 - 30% | Yes |
| Ethanol | 64-17-5 | 10 - 30% | Yes |
| Toluene | 108-88-3 | 10 - 30% | Yes |
| 2-methoxy-1-methylethyl acetate | 108-65-6 | 10 - 30% | Yes |
| pentyl acetate | 628-63-7 | 1 - 5% | Yes |
| Phenol | 108-95-2 | 1 - 5% | Yes |
| Xylenes | 1330-20-7 | 1 - 5% | Yes |
| Methanol | 67-56-1 | 1 - 5% | Yes |
| Ethylbenzene | 100-41-4 | 0.1 - 1% | Yes |
| Formaldehyde | 50-00-0 | 0.1 - 1% | Yes |
| Methyl isobutyl ketone | 108-10-1 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention. If symptoms are experienced, remove source of contamination or move victim to fresh air. If not breathing, give artificial respiration.
In case of contact, immediately remove contaminated clothing and flush skin with copious amounts of water. If symptoms develop and persist, get medical attention. Discard any shoes or clothing items that cannot be decontaminated.
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel. Give one to two glasses of water or milk. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Seek immediate medical attention (for eye contact). Treat symptomatically and supportively.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
Vapors are heavier than air and may travel to ignition sources and flash back. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.
Dispose of according to Federal, State and local governmental regulations. Absorb the spilled material with an inert absorbent (nonflammable) material.
Materials: inert absorbent (nonflammable) material
Related Products
Similar products with comparable safety profiles
BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON 330 3.628 KG *RWE
---
BONDERITE S-FN 329 DRYFILM COATING ACHESON known as EMRALON329
---
BONDERITE S-FN 310A FUNCTIONAL PREVENTIVE COATING ACHESON known as Emralon 310A 3.8 KG
---
BONDERITE S-FN 309 DRYFILM COATING ACHESON known as EMRALON309
---
BONDERITE S-OT 310B FUNCTIONAL COATING ACHESON
---
BONDERITE S-FN 860 FUNCTIONAL PREVENTIVE COATING ACHESON known as COPPE RSHIELD 860
---
BONDERITE S-FN AQUADAG E CONDUCTIVE COATING ACHESON
---
BONDERITE S-FN 213 DRYFILM COATING ACHESON known as DAG213
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Do not cut or weld on empty drums. Sufficient vapors from residues may be present to cause explosion and serious injury and/or death. Wash thoroughly after handling. Ground and bond all equipment as required (when transferring products).
Store between 40 °F (4.4 °C) and 90 °F (32.2 °C). Keep the container tightly closed and in a cool, well-ventilated place. Store in original container until ready to use.
Wash thoroughly after handling. Keep out of reach of children and away from food and drink.
Remove all sources of ignition. Keep away from heat, spark and flame. Ground and bond metal containers for liquid transfer to avoid static sparks.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Heat, flames, sparks and other sources of ignition.
This product may react with strong oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1139
- Shipping Name
- Coating solution
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON330?
The signal word is danger.
What is the physical form of BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON330?
BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON330 is a liquid with blue color. It has alcohol, pungent odor.
What is the solubility of BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON330?
Insoluble Water, Slightly soluble Water
What is BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON330 used for?
Dry film lubricant
What are the hazard statements for BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON330?
This substance has 12 hazard statements:
- H225: HIGHLY FLAMMABLE LIQUID AND VAPOUR.
- H302 + H332: HARMFUL IF SWALLOWED OR IF INHALED.
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H319: CAUSES SERIOUS EYE IRRITATION.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
- H336: MAY CAUSE DROWSINESS OR DIZZINESS.
- H341: SUSPECTED OF CAUSING GENETIC DEFECTS.
- H350: MAY CAUSE CANCER.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
- H370: CAUSES DAMAGE TO ORGANS.
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE S-FN 330 FUNCTIONAL COATING ACHESON known as EMRALON330?
The melting point is < 0 °C (< 32°F) and the boiling point is 78 °C (172.4 °F).