LOCTITE STYCAST OA 4000 known as HYSOL OA4000 QT LED CASTNG 1KG

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice. Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. If symptoms develop and persist, get medical attention.

Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated. Remove contaminated clothing and footwear. Immediately flush skin with plenty of water (using soap, if available). If symptoms develop and persist, get medical attention. Wash clothing before reuse.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately. Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.

Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person. DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If symptoms develop and persist, get medical attention.

Water spray (fog), foam, dry chemical or carbon dioxide.

Not available.

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

In case of fire, keep containers cool with water spray.

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Do not allow product to enter sewer or waterways.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed container until ready for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Use only with adequate ventilation. Remove all sources of ignition. Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Wear suitable protective clothing, safety glasses and gloves. See Section 8 of the SDS for Personal Protective Equipment. When using do not eat, drink or smoke. Keep container closed.

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store in a dry place. Avoid moisture. Keep away from heat, spark and flame. Store in original container until ready to use. Store away from incompatible materials identified in section 10.

Wash thoroughly after handling. When using do not eat, drink or smoke.

Remove all sources of ignition. Keep away from heat, spark and flame.

Use local ventilation if general ventilation is insufficient to maintain vapor concentration below established exposure limits. Use local ventilation if general ventilation is insufficient to maintain vapor concentration below established exposure limits. Use local exhaust ventilation if the potential for airborne exposure exists.

Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists. Safety showers and eye wash stations should be available. Safety goggles or safety glasses with side shields. Full face protection should be used if the potential for splashing or spraying of product exists. Safety showers and eye wash stations should be available.

Use NIOSH approved respirator if there is potential to exceed exposure limit(s). Use a NIOSH approved air-purifying respirator if the potential to exceed established exposure limits exists.

Use chemical resistant, impermeable clothing including gloves and either an apron or body suit to prevent skin contact. Use impermeable gloves and protective clothing as necessary to prevent skin contact.

Stable under normal conditions of storage and use.

Not available.

None under normal processing.

Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight.

Oxidizing agents. Acids. Bases. Amines. Strong oxidizing agents. Strong acids and strong bases. Strong alkalis.

Oxides of carbon. Phenolics. Toxic fumes. Irritating vapors.