NextSDS Logo
Safety Data Sheet EN

BONDERITE C-IC D357 REP AERO ACID DEOXIDIZER known as TURCO D 357 REPLENISHER

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-IC D357 REP AERO ACID DEOXIDIZER known as TURCO D 357 REPLENISHER
Product Code
1351015

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Rust dissolver

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Met. Corr. Cat. 1
Acute Tox. Cat. 4
Acute Tox. Cat. 4
Skin Corr. Cat. 1
Skin Corr. Cat. 1B
Eye Dam. Cat. 1
Carc. Cat. 1A

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

EUH031 CONTAINS FLUORIDES. MAY CAUSE DELAYED BURNS (NOT IMMEDIATELY PAINFUL OR VISIBLE)!
EUH059 LONG TERM EXPOSURE TO FLUORIDES OVER YEARS MAY CAUSE FLUOROSIS!
H290 MAY BE CORROSIVE TO METALS.
H302 + H312 HARMFUL IF SWALLOWED OR IN CONTACT WITH SKIN.
H314 CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
H350 MAY CAUSE CANCER.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P234 Keep only in original packaging.
P264 Wash affected area thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves, clothing, eye and face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P304 + P341 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical attention.
P310 Immediately call a POISON CENTER or physician.
P361 If on skin (or hair): Take off immediately all contaminated clothing.
P363 Wash contaminated clothing before reuse.
P390 Absorb spillage to prevent material damage.
P405 Store locked up.
P406 Store in corrosive resistant container with a resistant inner liner.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Sulfuric acid 7664-93-9 30 - 60% Yes
fluorosilicic acid 16961-83-4 5 - 10% Yes
Hydrogen fluoride 7664-39-3 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. If breathing is difficult, give oxygen. Trained personnel should administer 2.5% calcium gluconate through a nebulizer for 20 minutes.

Skin contact

Remove contaminated clothing and footwear while rinsing the affected area with large amounts of running water for at least 15 minutes. GET IMMEDIATE MEDICAL ATTENTION. If iced solution of 0.13% aqueous Benzalkonium Chloride (Zephiran) or 2.5% calcium gluconate gel is available, rinsing may be limited to 5 minutes, with the soak solution or gel applied as soon as the rinsing is stopped. If using calcium gluconate gel, it should be continuously re-applied and massaged into the affected area until pain has been relieved for at least 30 minutes. If Benzalkonium Chloride (Zephiran) or calcium gluconate gel is not available, rinsing must continue until medical treatment is provided.

Eye contact

Immediately flush affected eye with large amounts of gently flowing water or 0.9% sterile saline solution for at least 15 minutes. Hold eyelid wide open. Get immediate medical attention. Eye flushing should continue during transportation to a doctor.

Ingestion

Get immediate medical attention. Do not induce vomiting. Attempt immediate administration of a fluoride binding substance: milk, chewable calcium carbonate tablets or 4-8 ounces (120-240 ml) of milk of magnesia or a liquid antacid. Avoid large amounts of liquid as it may induce vomiting. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

GET IMMEDIATE MEDICAL ATTENTION.

Medical Treatment

Treatment of hypocalcemia associated with corrosive fluoride compounds exposure may be corrected by intravenous calcium gluconate or calcium chloride. Treatment of hypomagnesemia may be corrected by intravenous magnesium sulfate.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Specific hazards

May liberate large quantities of dense, foul-smelling smoke which may contain unidentified toxic gasses.

Instructions

Wear full protective clothing. Wear self-contained breathing apparatus.

Firefighter Protection

Wear full protective clothing. Wear self-contained breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so. Wear appropriate personal protective equipment. Do not allow product to enter sewer or waterways.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only. NEVER ADD WATER TO PRODUCT. For dilutions, add product slowly to water while stirring. Use caution; heat may be generated.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Thaw and mix thoroughly if frozen.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solubility In Fat
---
Freezing Point
---
Appearance
---
Flash Point
Not applicable
Dynamic Viscosity
---
Upper Explosive Limit
Not available.
Solidification Point
---
Odor Threshold
Not available.
Ph
< 1
Colour Intensity
---
Physical State Data
liquid
Vapor Pressure
Not determined
Boiling Point
> 100 °C (> 212°F)
Voc Content
Not applicable
Relative Evaporation Rate
---
Solubility
---
Bulk Density
---
Molecular Weight
---
Flammability
Not applicable
Lower Explosive Limit
Not available.
Crystallisation Point
---
Evaporation Rate
Not available.
Density
---
Physical State
Liquid
Decomposition Temperature
Not available.
Cloud Point
---
Softening Point
---
State Under Standard Conditions
---
Solubility In Water
Complete
Relative Density
1.39 - 1.40
Auto Ignition Temperature
Not applicable
Colour
Colorless to light yellow
Melting Point
Not determined
Metal Corrosion
---
Properties Status
---
Explosive Limits
---
Odor
Acidic
Partition Coefficient
Not determined
Vapor Density
Not determined
Form
---
Kinematic Viscosity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials.

Incompatible

Keep away from organic, alkaline, and oxidizing materials, metallic powders, chromates, chlorates, nitrates, and carbides. This material will react with glass, concrete, certain metals, silica containing materials, rubber, leather, and many organics.

Decomposition

May liberate hydrogen fluoride. Oxides of sulfur.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3264
Shipping Name
Corrosive liquid, acidic, inorganic, n.o.s. (Sulfuric acid, Fluorosilicic acid)
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-IC D357 REP AERO ACID DEOXIDIZER known as TURCO D 357 REPLENISHER?

The signal word is danger.

What is the physical form of BONDERITE C-IC D357 REP AERO ACID DEOXIDIZER known as TURCO D 357 REPLENISHER?

BONDERITE C-IC D357 REP AERO ACID DEOXIDIZER known as TURCO D 357 REPLENISHER is a liquid with colorless to light yellow color. It has acidic odor.

What is BONDERITE C-IC D357 REP AERO ACID DEOXIDIZER known as TURCO D 357 REPLENISHER used for?

Rust dissolver

What are the hazard statements for BONDERITE C-IC D357 REP AERO ACID DEOXIDIZER known as TURCO D 357 REPLENISHER?

This substance has 6 hazard statements:

  • EUH031: CONTAINS FLUORIDES. MAY CAUSE DELAYED BURNS (NOT IMMEDIATELY PAINFUL OR VISIBLE)!
  • EUH059: LONG TERM EXPOSURE TO FLUORIDES OVER YEARS MAY CAUSE FLUOROSIS!
  • H290: MAY BE CORROSIVE TO METALS.
  • H302 + H312: HARMFUL IF SWALLOWED OR IN CONTACT WITH SKIN.
  • H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
  • H350: MAY CAUSE CANCER.

What is the melting point of BONDERITE C-IC D357 REP AERO ACID DEOXIDIZER known as TURCO D 357 REPLENISHER?

The melting point is Not determined and the boiling point is > 100 °C (> 212°F).