Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE M-AD 172 ACCELERATOR known as ACCELERATOR 172
- Product Code
- 595592
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Hazardous Component(s) | CAS Number | Weight %* |
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| calcium chloride | 10043-52-4 | 10 - 30% | Yes |
| Sodium chloride | 7647-14-5 | 1 - 5% | Yes |
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately remove the affected person to fresh air.
Immediately wash skin thoroughly with soap and water.
Flush eyes immediately with large amounts of water.
Symptoms: Irritation
Do not induce vomiting. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
Get immediate medical attention.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
None identified.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so. Do not allow product to enter sewer or waterways.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE L-AD 171 ACCELERATOR
---
BONDERITE M-AD 134 ACCELERATOR DR265KG
---
BONDERITE M-AD 131-H PRETREATMENT ADDITVE known as ACCELERATOR 131-H
---
BONDERITE M-AD 565 PHOSPHATE ACCELERATOR known as NEUTRALIZER 565 1000KG CONT
---
BONDERITE M-AC AL2000 PHOSPHATE ACTIVATOR
---
BONDERITE C-AD 4215-LT AERO
---
BONDERITE C-IC 120SS ACCELERATOR ACID CLEANER known as RIDOLINE 120SS ARNOLD
---
BONDERITE M-CR 1132 M AERO
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Wear impervious gloves for prolonged contact.
Wear safety glasses; chemical goggles (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
Will not occur.
None identified.
None expected.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BONDERITE M-AD 172 ACCELERATOR known as ACCELERATOR 172?
The signal word is warning.
What is the physical form of BONDERITE M-AD 172 ACCELERATOR known as ACCELERATOR 172?
BONDERITE M-AD 172 ACCELERATOR known as ACCELERATOR 172 is a liquid with clear color. It has odourless / odorless odor.
What is the solubility of BONDERITE M-AD 172 ACCELERATOR known as ACCELERATOR 172?
Complete
What is BONDERITE M-AD 172 ACCELERATOR known as ACCELERATOR 172 used for?
Additive
What are the hazard statements for BONDERITE M-AD 172 ACCELERATOR known as ACCELERATOR 172?
This substance has 1 hazard statement:
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE M-AD 172 ACCELERATOR known as ACCELERATOR 172?
The melting point is Not applicable and the boiling point is >210 °F (>98.9 °C).