NextSDS Logo
Safety Data Sheet EN

FUTURE® PREMIUM FLOOR FINISH

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FUTURE® PREMIUM FLOOR FINISH

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Floor care

Manufacturers & Suppliers

S

S.C. Johnson & Son, Inc.

manufacturer

1525 Howe Street, Racine WI 53403-2236

S

S.C. Johnson and Son, Limited

manufacturer

1 Webster Street, Brantford, Ontario N3T 5R1

Emergency Contacts

24 Hr. Medical & Transport Emergency

(866) 231-5406

24 Hr. International Medical Emergency

(952) 852-4647

CANUTEC (Canadian Transportation)

(613) 996 - 6666

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 May cause: Mild eye irritation.

Precautionary Statements

Avoid contact with eyes, skin and clothing.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Tributoxy ethyl phosphate 000078-51-3 1 - 5% No
Diethylene glycol ethyl ether 000111-90-0 1 - 5% No
Modified Acrylic Copolymer 000000-00-0 10 - 20% No
Water 007732-18-5 80 - 90% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If breathing is affected, get medical attention.

Skin contact

Rinse with plenty of water. If irritation develops, get medical attention.

Eye contact

Flush immediately with plenty of water for at least 15 to 20 minutes. If irritation develops, get medical attention.

Ingestion

Do not induce vomiting! Immediately drink 1-2 glasses of water or milk. Do not administer anything by mouth to an unconscious person. Get medical attention immediately.

Immediate Medical Attention

Get medical attention immediately if irritation develops or if breathing is affected.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam. CO2. Dry chemical. Water fog.

Specific hazards

No special hazards known.

Instructions

Normal fire fighting procedure may be used.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Absorb with oil-dri or similar inert material. Sweep or scrape up and containerize. Rinse affected area thoroughly with water.

Cleanup methods

Sweep or scrape up and containerize.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Keep out of reach of children and pets.

Storage

Store in a cool, dry place with adequate ventilation. Keep from freezing.

Hygiene

Use only as directed. Observe good personal hygiene practices.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

General room ventilation adequate.

Hands

If prolonged or repeated contact is possible, wear suitable gloves.

Eyes

No special requirements under normal use conditions. If major exposure is possible (e.g. spills): Chemical goggles.

Respiratory

No special requirements under normal use conditions.

Skin/Body

No special requirements under normal use conditions. If prolonged or repeated contact is possible, wear suitable gloves.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Boiling Point
> 93°C (200°F)
Density
---
Vapor Density
---
Colour
Translucent
Bulk Density
---
Appearance
---
Solubility
---
Lower Explosive Limit
---
Ph
8.3 to 8.7
Physical State
Liquid
Decomposition Temperature
---
Metal Corrosion
---
Partition Coefficient
---
Freezing Point
< 0°C (32°F)
Evaporation Rate
Not Available
Explosive Limits
---
Melting Point
---
Cloud Point
---
Crystallisation Point
---
Upper Explosive Limit
---
Solubility In Fat
---
Flammability
---
State Under Standard Conditions
---
Relative Evaporation Rate
---
Relative Density
1.026
Colour Intensity
---
Softening Point
---
Auto Ignition Temperature
---
Odor Threshold
---
Odor
Fragrant
Flash Point
---
Physical State Data
liquid
Voc Content
Not Available
Solubility In Water
Dispersible
Solidification Point
---
Form
---
Vapor Pressure
Not Available
Dynamic Viscosity
---
Molecular Weight
---
Kinematic Viscosity
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Hazardous reactions

Will not occur.

Avoid

None known.

Incompatible

No special requirements.

Decomposition

When exposed to fire: Produces normal products of combustion.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FUTURE® PREMIUM FLOOR FINISH?

The signal word is warning.

What is the physical form of FUTURE® PREMIUM FLOOR FINISH?

FUTURE® PREMIUM FLOOR FINISH is a liquid with translucent color. It has fragrant odor.

What is FUTURE® PREMIUM FLOOR FINISH used for?

Floor care

What are the hazard statements for FUTURE® PREMIUM FLOOR FINISH?

This substance has 1 hazard statement:

  • H319: May cause: Mild eye irritation.