Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Equinox Ultra High Speed Floor Coating
- Product Code
- 103L5
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Floor finish
Uses advised against
Other than per labelled instructions.
Manufacturers & Suppliers
Amano Pioneer Eclipse Corporation
manufacturer
P.O. Box 909, 1 Eclipse Road, Sparta, NC 28675
1-336-372-8080
http://www.pioneereclipse.com
Emergency Contacts
CHEMTREC
1-800-424-9300
Day or Night
CHEMTREC
1-703-527-3887
Day or Night
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tributoxyethylphosphate EC: 201-122-9 | 78-51-3 | 1 - 5% | Yes |
| Trimethyl Pentanyl Diisobutyrate EC: 229-934-9 | 6846-50-0 | 1 - 5% | Yes |
| Dodecan-1-ol, ethoxylated EC: 500-002-6 | 9002-92-0 | 1 - 5% | Yes |
| 1-Methoxy-2-propanol EC: 203-539-1 | 107-98-2 | 0.1% | Yes |
| Methylchloroisothiazolinone, Methylisothiazolinone EC: 611-341-5 | 55965-84-9 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove to fresh air. If symptoms persist, seek medical attention.
Symptoms: None expected under normal use.
Wash with plenty of water. If irritation develops and persists, seek medical attention.
Symptoms: Not expected to present a significant skin hazard.
Rinse with plenty of water. If irritation develops and persists, seek medical attention.
Symptoms: May cause slight irritation.
If ingested, do not induce vomiting. Seek medical attention.
Symptoms: May cause irritation of the linings of the mouth, throat and gastrointestinal tract.
Immediate Medical Attention
In case of any doubt or when irritation occurs or persists seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All known extinguishants can be used.
The product itself does not support combustion.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection. Fire-fighters should wear clothing conforming to EN469 for chemical incidents.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Material spilled on hard surface can present a serious slipping/falling hazard.
Absorb spill on inert material (e.g. sand, earth) and dispose of as waste material in accordance with national and regional provisions.
Keep spectators away. Floors may be slippery; use care to avoid falling. Neutralize spill area. Dike and contain spill with inert material (e.g. sand, earth). Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for disposal.
Keep spills and cleaning runoff out of sewers and open bodies of water.
Absorb spill on inert material (e.g. sand, earth) and dispose of as waste material in accordance with national and regional provisions. Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for disposal.
Materials: sand, earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Wash thoroughly after handling.
Keep from freezing. Keep container sealed when not in use. Keep out of reach of children.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only with adequate ventilation. Use local ventilation and other engineering controls to maintain airborne contaminants below established and recommended exposure limits. If this product contains ingredients with exposure limits, monitoring may be required to determine the effectiveness of ventilation and other control measures.
This product is not classified as dangerous for the skin and therefore no protection gloves are necessary when this product is used. In case of prolonged use or sensitive skin, where irritation is possible, it would be recommended to use gloves. Protective gloves should be selected according to the application and duration of use. Workplace selection should take into consideration handling requirements, physical requirements and exposure to other substances.
Safety eyewear is recommended, to avoid chemical splashes and mists. Safety glasses or goggles (EN166).
Respiratory protection should be worn when there is a potential of inadequate ventilation. If exposure limits are exceeded or symptoms are experienced, use an approved respirator with multi-purpose combination filter. (E.g. - EN 14387- ABEK)
No specific environmental exposure controls known.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
None known
None known
Do not mix with other chemicals unless stated on the product label.
None known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Equinox Ultra High Speed Floor Coating?
The signal word is warning.
What is the physical form of Equinox Ultra High Speed Floor Coating?
Equinox Ultra High Speed Floor Coating is a liquid appearing as white liquid with white color. It has slight odor characteristic of raw material, no added fragrance odor.
What is the solubility of Equinox Ultra High Speed Floor Coating?
miscible in water
What is Equinox Ultra High Speed Floor Coating used for?
Floor finish
What are the hazard statements for Equinox Ultra High Speed Floor Coating?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.