Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Equinox Ultra High Speed Floor Coating
- Product Code
- 103L5
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- TRK6-29U2-Q008-PX6W
Identified Uses
Floor finish
Uses advised against
Other than per labelled instructions.
Manufacturers & Suppliers
Amano Pioneer Eclipse® Corporation
manufacturer
P.O. Box 909, 1 Eclipse Road, Sparta, NC 28675
1-336-372-8080
http://www.pioneereclipse.com
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The data for this section has not been processed yet.
First Aid Measures
Emergency procedures for chemical exposure incidents
Allow affected person to breathe fresh air.
Symptoms: respiratory symptoms
Wash skin with mild soap and water.
Symptoms: Not expected to present a significant skin hazard.
Immediately rinse with clean water for 10-15 minutes.
Symptoms: May cause slight irritation.
Rinse mouth. Do NOT induce vomiting. Give water to drink.
Symptoms: May cause irritation of the linings of the mouth, throat and gastrointestinal tract.
Immediate Medical Attention
Seek medical advice immediately and show this container or label. If eye irritation persists: Get medical advice/attention. If skin irritation persists: Get medical advice/attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All known extinguishants can be used.
The product itself does not maintain combustion.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection. Fire-fighters should wear clothing conforming to EN469 for chemical incidents.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Material spilled on hard surface can present a serious slipping/falling hazard.
Absorb spill on inert material (e.g. sand, earth) and dispose of as waste material in accordance with national and regional provisions.
Keep spectators away. Floors may be slippery; use care to avoid falling. Dike and contain spill with inert material (e.g. sand, earth). Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for disposal.
Keep spills and cleaning runoff out of sewers and open bodies of water.
Absorb spill on inert material; Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Wash thoroughly after handling. Use in well-ventilated areas.
Keep from freezing. Keep container sealed when not in use. Keep out of reach of children.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only with adequate ventilation. Use local ventilation and other engineering controls to maintain airborne contaminants below established and recommended exposure limits. If this product contains ingredients with exposure limits, monitoring may be required to determine the effectiveness of ventilation and other control measures.
Wear chemical resistant gloves. (EN374) Protective gloves should be selected according to the application and duration of use. Workplace selection should take into consideration handling requirements, physical requirements and exposure to other substances.
Under normal use of this product, eye protection not necessary. If there is a risk of liquid being splashed: Wear eye protection. Safety glasses or goggles (EN166).
Under normal use of this product, respiratory protection not necessary. Respiratory protection should be worn when there is a potential of inadequate ventilation. If exposure limits are exceeded or symptoms are experienced, use an approved respirator with multi-purpose combination filter. (E.g. - EN 14387- ABEK)
No specific environmental exposure controls known.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under normal conditions.
None known
None known
Do not mix with other chemicals unless stated on the product label.
None known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.4 MOBILITY IN SOIL
12.5 RESULTS OF PBT AND vPvB ASSESSMENT:
The mixture does not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.6 ENDOCRINE DISRUPTING PROPERTIES
12.7 OTHER ADVERSE EFFECTS
12.1 TOXICITY
Ecological testing has not been completed on the mixture. Classified as Hazardous to the aquatic environment, Chronic Hazard - Category 2.
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.2 PERSISTANCE AND DEGRADABILITY:
12.2 Persistence and degradability
12.2 Persistence and degradability
12.2 Persistence and degradability
12.2 Persistence and degradability
12.2 Persistence and degradability
12.3 BIOACCUMULATIVE POTENTIAL:
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal of this material should be in accordance with local, regional and national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Does not contain substances or labelled product uses subject to REACH Annex XVII restriction. Contains no substance on the REACH candidate list ≥ 0,1 % / SCL. Contains no REACH Annex XIV substances. Contains no substance subject to EU 649/2012. Contains no substance subject to EU 2019/1021.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Equinox Ultra High Speed Floor Coating?
The signal word is warning.
What is the physical form of Equinox Ultra High Speed Floor Coating?
Equinox Ultra High Speed Floor Coating is a liquid with white, opaque color. It has slight odor characteristic of raw material, no added fragrance odor.
What is the solubility of Equinox Ultra High Speed Floor Coating?
Water, completely soluble
What is Equinox Ultra High Speed Floor Coating used for?
Floor finish
What are the hazard statements for Equinox Ultra High Speed Floor Coating?
This substance has 3 hazard statements:
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Equinox Ultra High Speed Floor Coating?
The melting point is ± 0 °C and the boiling point is ± 100°C.