Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Macropoxy® EG Phosphate N Comp. A
- Product Code
- 000000000000495680
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Coatings and paints, thinners, paint removers
Uses advised against
Reserved for industrial and professional use.
Manufacturers & Suppliers
Sherwin-Williams Coatings Deutschland GmbH
manufacturer
Rieter Tal 1, 71665 Vaihingen / Enz
+4970421090
Supplier
+49 (0) 7042 109-0
Emergency Contacts
Supplier
+49 (0) 7042 109-0
24 hours a day
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| xylene EC: 215-535-7 | 1330-20-7 | 10 - 20% | Yes |
| reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight ≤ 700) EC: 500-033-5 | 25068-38-6 | 10 - 20% | Yes |
| trizinc bis(orthophosphate) EC: 231-944-3 | 7779-90-0 | 10 - 20% | Yes |
| zinc oxide EC: 215-222-5 | 1314-13-2 | 2.5 - 10% | Yes |
| 1-methoxy-2-propanol EC: 203-539-1 | 107-98-2 | 1 - 10% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 1 - 2.5% | Yes |
| 2-methylpropan-1-ol EC: 201-148-0 | 78-83-1 | 1 - 3% | Yes |
| oxirane, mono[(C12-14-alkyloxy)methyl] derivs. EC: 271-846-8 | 68609-97-2 | 1 - 10% | Yes |
| 1,3-bis[12-hydroxy-octadecamide-N-methylene]-benzene | 911674-82-3 | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Consult a physician after significant exposure. If unconscious, place in recovery position and seek medical advice.
Symptoms: Mucous membrane and respiratory system irritation, headache, dizziness, fatigue, muscular weakness, drowsiness and, in extreme cases, loss of consciousness.
If skin irritation persists, call a physician. If on skin, rinse well with water. If on clothes, remove clothes.
Symptoms: Removal of natural fat from the skin, resulting in non-allergic contact dermatitis, absorption through the skin, skin irritation, allergic skin reaction.
Immediately flush eye(s) with plenty of water. Remove contact lenses. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist.
Symptoms: Irritation, reversible damage, serious eye irritation.
Keep respiratory tract clear. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. Take victim immediately to hospital.
Immediate Medical Attention
Take victim immediately to hospital.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical
High volume water jet
Do not allow run-off from fire fighting to enter drains or water courses.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas.
Prevent product from entering drains. Prevent further leakage or spillage if safe to do so.
collect with non-combustible absorbent material and place in container for disposal according to local / national regulations (see section 13)
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Macropoxy® EG-1 Plus Comp. A
---
Macropoxy® Poxicolor Comp. A
---
Potassium pyrophosphate
CAS: 7320-34-5
Sodium Acid Pyrophosphate
---
Orthophosphoric acid 85% AnalaR NORMAPUR® Reag. Ph.Eur., ACS
CAS: 7664-38-2
Bis(2-ethylhexyl) phosphate
CAS: 298-07-7
Sodium pyrophosphate
CAS: 7722-88-5
Sodium pyrophosphate
CAS: 7722-88-5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Good housekeeping standards, regular safe removal of waste materials and regular maintenance of spray booth filters will minimise the risks of spontaneous combustion and other fire hazards. Avoid formation of aerosol. Do not breathe vapors/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Take precautionary measures against static discharges. Provide sufficient air exchange and/or exhaust in work rooms. Open drum carefully as content may be under pressure. Dispose of rinse water in accordance with local and national regulations. Persons susceptible to skin sensitization problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used.
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday.
Do not spray on a naked flame or any incandescent material. Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapors). Keep away from open flames, hot surfaces and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General and local exhaust ventilation is recommended to maintain vapor exposures below recommended limits.
Chemical resistant gloves made of butyl rubber or nitrile rubber category III according to EN 374. Equipment should conform to EN 374. Protective equipment only chosen according to specific regulatory requirements after a risk assessment. Follow the instructions for use issued by the producer. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough. Be aware that in daily use the durability of a chemical resistant protective glove can be notably shorter than the break through time measured according to EN 374, due to the numerous outside influences (e.g. temperature). The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. Barrier creams may help to protect the exposed areas of skin, they should however not be applied once exposure has occurred. The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Eye wash bottle with pure water. Safety glasses with side-shields conforming to EN166. Tightly fitting safety goggles. Wear face-shield and protective suit for abnormal processing problems.
Equipment should conform to EN 14387. General and local exhaust ventilation is recommended to maintain vapor exposures below recommended limits. Where concentrations are above recommended limits or are unknown, appropriate respiratory protection should be worn. Follow OSHA respirator regulations (29 CFR 1910.134) and use NIOSH/MSHA approved respirators. Protection provided by air purifying respirators against exposure to any hazardous chemical is limited. Use a positive pressure air supplied respirator if there is any potential for uncontrolled release, exposure levels are unknown, or any other circumstance where air purifying respirators may not provide adequate protection. When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. No personal respiratory protective equipment normally required. Filter type: Combined particulates and organic vapor type (A-P)
Protective equipment only chosen according to specific regulatory requirements after a risk assessment. Equipment should conform to EN 14605. Impervious clothing. Choose body protection according to the amount and concentration of the dangerous substance at the work place.
The product should not be allowed to enter drains, water courses or the soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions. No decomposition if stored and applied as directed.
No hazards to be specially mentioned.
No dangerous reaction known under conditions of normal use. No decomposition if stored and applied as directed. Vapors may form explosive mixture with air.
Temperatures greater than recommended storage temperature. Heat, flames and sparks.
Strong acids and strong bases, Strong oxidizing agents
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Macropoxy® EG Phosphate N Comp. A?
The signal word is danger.
What is the physical form of Macropoxy® EG Phosphate N Comp. A?
Macropoxy® EG Phosphate N Comp. A is a liquid with various, colorless color. It has hydrocarbon-like odor.
What is Macropoxy® EG Phosphate N Comp. A used for?
Coatings and paints, thinners, paint removers
What are the hazard statements for Macropoxy® EG Phosphate N Comp. A?
This substance has 7 hazard statements:
- H226: Flammable liquid and vapor.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H360F: May damage fertility.
- H373: May cause damage to organs through prolonged or repeated exposure.
- H411: Toxic to aquatic life with long lasting effects.