Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- terralin® protect
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Disinfectants and general biocidal products
Uses advised against
For professional users only.
Manufacturers & Suppliers
Schülke & Mayr GmbH
manufacturer
Robert-Koch-Str. 2, 22851 Norderstedt, Germany
+49 (0)40/ 52100-0
http://www.schuelke.com
Emergency Contacts
Carechem 24 International
+44 1865 407333
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Solution of the following substances with harmless additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides | 68424-85-1 | 20 - 25% | No |
| 2-phenoxyethanol | 122-99-6 | 10 - 20% | No |
| Poly(oxy-1,2-ethanediyl), .alpha.-tridecyl-.omega.-hydroxy-, branched | 69011-36-5 | 3 - 10% | No |
| propan-2-ol | 67-63-0 | 1 - 10% | No |
| Betaines, C12-14-alkyldimethyl | 66455-29-6 | 1 - 2.5% | No |
| 1,1',1'',1'''-ethylenedinitrilotetrapropan-2-ol | 102-60-3 | 1 - 10% | No |
| Glycine, aminoalkyl derivs. | --- | 0.25 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician.
Wash off immediately with plenty of water for at least 15 minutes. Consult a physician.
In case of eye contact, remove contact lens and rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention.
Do NOT induce vomiting. Rinse mouth with water. Give small amounts of water to drink. Obtain medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that eyewash stations and safety showers are close to the workstation location.
The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it. Splash protection: disposable nitrile rubber gloves e.g. Dermatril (layer thickness: 0.11 mm) made by KCL or gloves from other manufacturers offering the same protection. Prolonged contact: Nitrile rubber gloves e.g. Camatril (>480 Min., layer thickness: 0,40 mm) or butyl rubber gloves e.g. Butoject (>480 Min., layer thickness: 0,70 mm) made by KCL or gloves from other manufacturers offering the same protection.
Safety glasses with side-shields conforming to EN166
Not required; except in case of aerosol formation. Respiratory protection complying with EN 141. Recommended Filter type: A
Work uniform or laboratory coat.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1903
- Shipping Name
- DISINFECTANT, LIQUID, CORROSIVE, N.O.S. (Alkyl(C12-16)dimethylbenzylammoniumchloride)
- Transport Class
- 8
- Packing Group
- III
Packing instruction (cargo aircraft) : 856, Packing instruction (passenger aircraft) : 852
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for terralin® protect?
The signal word is danger.
What is the physical form of terralin® protect?
terralin® protect is a liquid appearing as liquid with green color. It has pleasant odor.
What is terralin® protect used for?
Disinfectants and general biocidal products
What are the hazard statements for terralin® protect?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H400: Very toxic to aquatic life.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of terralin® protect?
The melting point is < -5 °C and the boiling point is ca. 90 °C.