Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Bio-Fluid-Spray (GB)
- Product Code
- 116000
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Technical Aerosols
Manufacturers & Suppliers
WEICON GmbH & Co. KG
distributor
Königsberger Straße 255, DE-48157 Münster, Postbox 84 60, DE-48045 Münster
++49(0)251 / 9322 - 0
http://www.weicon.de
WEICON GmbH & Co. KG
manufacturer
Königsberger Str. 255, DE-48157 Münster
Emergency Contacts
GIZ Bonn
++49(0)228-19 240
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Medical white oil, containing additives, in aerosol can. Propellant: propane / butane
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| propane/butane-mixture | 61641-74-5 | 40 - 45% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure of fresh air.
In case of contact with skin wash off with warm water.
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice.
Do not induce vomiting.
Immediate Medical Attention
In the event of symptoms refer for medical treatment. Consult a doctor if skin irritation persists. If swallowed seek medical advice immediately and show the doctor packing or label.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Dry powder, Carbon dioxide
Full water jet
Danger of bursting. In case of fire formation of dangerous gases possible.
Cool endangered containers with water spray jet.
Firefighter Protection
Fire-fighting operations, rescue and clearing work under effect of combustion and smoulder gases just may be done with breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not discharge into the drains or bodies of water.
Take up with absorbent material
Materials: sand, kieselguhr, acid binder, general-purpose binder, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Do not inhale gases/vapours/aerosols.
Protect from heat and sunlight.
At work do not eat, drink, smoke or take drugs. Wash hands before breaks and after work.
Do not spray on a naked flame or any incandescent material. Protect from heat and sunlight.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Sufficient ventilation and exhaustion.
In the cases of special applications, it is recommended to check the chemical resistance with the manufacturer of the gloves. Glove material specification [make/type, thickness, permeation time/life, wetting resistance]:: Nitrile rubber; 0,4mm; 480min;60min. Chemical protective gloves must be chosen carefully in view of their design and depending on the dependence on the concentration and amounts of dangerous goods used in the specific working tasks.
tightly fitting goggles
If ventilation insufficient, wear respiratory protection.
protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No information available.
No information available.
No information available.
Keep away from heat. Formation of explosive gas/air mixtures.
No information available.
Carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Caution: Gases
Caution: Gases
Caution: Gases
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Bio-Fluid-Spray (GB)?
The signal word is danger.
What is the physical form of Bio-Fluid-Spray (GB)?
Bio-Fluid-Spray (GB) is a aerosol appearing as aerosol with colourless, clear color. It has solvent-like odor.
What is Bio-Fluid-Spray (GB) used for?
Technical Aerosols
What are the hazard statements for Bio-Fluid-Spray (GB)?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
What is the melting point of Bio-Fluid-Spray (GB)?
The melting point is not determined and the boiling point is not applicable.