NextSDS Logo
Safety Data Sheet EN

FB-LUBE-P / SPRAY650

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FB-LUBE-P / SPRAY650
Product Form
Mixture
Product Code
FB-LUBE-P

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Industrial use

Manufacturers & Suppliers

F

FB KETTEN GmbH

national supplier

Stakelbrauk 11, DE 59889 Eslohe, Germany

+49 2973 979 14 0

Emergency Contacts

National Poisons Information Service (Birmingham Centre) City Hospital

0344 892 0111

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P273 Avoid release to the environment.
P280 Wear protective gloves, eye protection.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C, 122 °F.
P501 Dispose of contents and container to a hazardous or special waste collection point.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
butane (containing < 0,1 % butadiene) (Propellant gas (Aerosol)) substance with national workplace exposure limit(s) (GB) EC: 203-448-7 106-97-8 20 - 30% Yes
Hydrocarbons, C6, isoalkanes, <5% n-hexane EC: 931-254-9 --- 8 - 10% Yes
Sulfonic acids, petroleum, sodium salts EC: 271-781-5 68608-26-4 2 - 5% Yes
Di-tert-Butyl polysulfide EC: 273-103-3 68937-96-2 0.1 - 0.5% Yes
1H-Benzotriazole-1-methanamine, N,N-bis(2-ethylhexyl)-ar-methyl- EC: 619-007-0 94270-86-7 0.1 - 0.5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Allow affected person to breathe fresh air. Allow the victim to rest.

Skin contact

Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.

Eye contact

Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.

Ingestion

Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Unsuitable media

Do not use a heavy water stream.

Instructions

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel. Ventilate area.

Environmental

Prevent entry to sewers and public waters. Avoid release to the environment.

Cleanup methods

Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.

Materials: inert solids, such as clay or diatomaceous earth

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.

Storage

Keep only in the original container in a cool, well ventilated place. Keep container closed when not in use.

Hygiene

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

Fire prevention

Keep away from sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Protective gloves. Wear protective gloves. Material: Nitrile rubber (NBR), Polyvinylalcohol (PVA); Permeation: 6 (> 480 minutes); Standard: EN ISO 374

Eyes

Chemical goggles or safety glasses

Respiratory

Wear appropriate mask

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
Clear.
Colour
Yellow.
Colour Intensity
---
Form
---
Odor
characteristic.
Odor Threshold
Not available
Ph
Not available
Melting Point
Not available
Boiling Point
Not available
Flash Point
< 0 °C
Freezing Point
Not available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not available
Vapor Density
---
Relative Density
0,87 (PA)
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
Not available
Lower Explosive Limit
Not available
Explosive Limits
---
Auto Ignition Temperature
Not available
Decomposition Temperature
Not available
Solubility
Not available
Partition Coefficient
Not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
> 20,5 mm²/s (PA 40°C)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Not established.

Reactivity

No additional information available

Hazardous reactions

Not established.

Avoid

Direct sunlight. Extremely high or low temperatures.

Incompatible

Strong acids. Strong bases.

Decomposition

fume. Carbon monoxide. Carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2.1
Packing Group
Not applicable
IMDG

63, 190, 277, 327, 344, 381, 959

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FB-LUBE-P / SPRAY650?

The signal word is danger.

What is the physical form of FB-LUBE-P / SPRAY650?

FB-LUBE-P / SPRAY650 is a liquid appearing as clear. with yellow. color. It has characteristic. odor.

What is the solubility of FB-LUBE-P / SPRAY650?

Not available

What is FB-LUBE-P / SPRAY650 used for?

Industrial use

What are the hazard statements for FB-LUBE-P / SPRAY650?

This substance has 3 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of FB-LUBE-P / SPRAY650?

The melting point is Not available and the boiling point is Not available.