Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Biolube H Spray
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Food industry - oil spray - Only suitable for industrial use.
Uses advised against
Not suitable for commercial or private use.
Manufacturers & Suppliers
MOLYDUVAL GmbH
manufacturer
Halskestr.6 * 40880 Ratingen * Germany
+49 (2102) 9757-00
Emergency Contacts
Emergency Contact
+49 (2102) 9757-20
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Butane EC: 203-448-7 | 106-97-8 | 30 - 50% | Yes |
| Propane EC: 200-827-9 | 74-98-6 | 5 - 15% | Yes |
Substances listed on ECHA's Candidate List of Substances of Very High Concern (SVHC) are not intentional components of this product. It is therefore unlikely that those substances are contained in the product in quantities> 0.1%.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove exposed person to fresh air.
Symptoms: Difficulty breathing, headache, dizziness
Wash with plenty of soap and plenty of water. Consult a doctor if skin irritation persists.
Symptoms: dry skin
Long lasting rinse Rinse opened with water, if necessary, use eye wash. If symptoms persist, seek medical advice.
Rinse mouth and drink plenty of water. Do not induce vomiting. If symptoms persist, seek medical advice.
Symptoms: nausea
Immediate Medical Attention
Consult a doctor if skin irritation persists. If symptoms persist, seek medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Foam. Dry powder. Carbon dioxide (CO2).
Strong water jet.
In case of a fire, there any arise poisonous (CO, CO2 and other organic gases).
Extinguishing measures to the surroundings. Standard procedure for chemical fires.
Firefighter Protection
If necessary, use in case of fire, self contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
No special precautions.
Avoid entering into drains, water courses or soil.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Container under pressure. Do not expose to temperatures exceeding 50°C (f.e. sunlight). Do not open violently.
To be stocked cool and dry, protect from sunlight and do not expose to temperatures exceeding 50 degree C.
Smoking prohibited.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Gloves - oil resistant. Glove material: nitrile rubber, butyl rubber or fluoro rubber. Recommended thickness: = 0.4 mm. Penetration time of glove material Value for the permeation: Level = 480 min. The determined penetration times according to EN 374 part III are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of breakthrough time is recommended.
Safety glasses
Not required, except in case of aerosol formation. Avoid inhalation of vapors. Use respiratory protective device against the effects of fumes / dust / aerosol. Combination filter, eg. As DIN 3181 ABEK
work clothes
Do not discharge into surface water or drains
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Danger of explosion in case of overheating
No dangerous reaction known under conditions of normal use. Fumes can combine with air to form an explosive mixture.
No information available
no information available
no
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.2 Persistence and degradability
Product is not readily biodegradable. The main constituents are expected to be inherently biodegradable, but some components may persist in the environment.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
No information available
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS FLAMMABLE
- Transport Class
- Class 2 Gas
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Biolube H Spray?
The signal word is danger.
What is the physical form of Biolube H Spray?
Biolube H Spray is a aerosol appearing as aerosol with transparent color. It has typical odor.
What is Biolube H Spray used for?
Food industry - oil spray - Only suitable for industrial use.
What are the hazard statements for Biolube H Spray?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurized container: May burst when heated.