NextSDS Logo
Safety Data Sheet EN

BIO-DEGRADABLE LUBE PUMP SPRAY

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BIO-DEGRADABLE LUBE PUMP SPRAY
Product Code
IL61078, 163704

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Manufacturers & Suppliers

M

MacDermid plc

manufacturer

Palmer Street, Bordesley, Birmingham, B9 4EU

+44 (0) 121 606 8100

Emergency Contacts

Emergency Contact

+44 (0)208 762 8322

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Notes

This material is not classified as hazardous to Health or the Environment under current EU legislation.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move the exposed person to fresh air at once. Get medical attention if any discomfort continues.

Skin contact

Remove affected person from source of contamination. Promptly wash contaminated skin with water. Promptly remove clothing if soaked through and wash the skin with water. Get medical attention if irritation persists after washing.

Eye contact

Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes and get medical attention.

Ingestion

Promptly get affected person to drink large volumes of water to dilute the swallowed chemical. Rinse nose, mouth and throat with water. Do not induce vomiting. If vomiting occurs, the head should be kept low so that stomach vomit doesn't enter the lungs. Get medical attention immediately!

Immediate Medical Attention

Get medical attention immediately!

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, carbon dioxide or dry powder.

Specific hazards

Beware, risk of formation of toxic and corrosive gases.

Instructions

Avoid breathing fire vapours. Keep run-off water out of sewers and water sources. Dike for water control. If risk of water pollution occurs, notify appropriate authorities.

Firefighter Protection

Use air-supplied respirator during fire fighting. Wear full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear protective clothing as described in Section 8 of this safety data sheet. Avoid inhalation of vapours and contact with skin and eyes. In case of inadequate ventilation, use respiratory protection. In case of spills, beware of slippery floors and surfaces.

Large spill

Inform Authorities if large amounts are involved.

Environmental

Do not discharge into drains, water courses or onto the ground. Avoid discharge to the aquatic environment.

Cleanup methods

Absorb with inert, damp, non-combustible material, then flush area with water. Collect spillage in containers, seal securely and deliver for disposal according to local regulations.

Materials: inert, damp, non-combustible material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid spilling, skin and eye contact. Do not handle broken packages without protective equipment. Avoid eating, drinking and smoking when using the product.

Storage

Store in tightly closed original container in a dry, cool and well-ventilated place. Keep above the chemical's freezing point to avoid rupturing the container. Keep separate from food, feedstuffs, fertilisers and other sensitive material.

Hygiene

Observe good industrial hygiene practices.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

All handling to take place in well-ventilated area. Provide adequate general and local exhaust ventilation.

Hands

For prolonged or repeated skin contact use suitable protective gloves. Nitrile gloves are recommended.

Eyes

Wear splash-proof eye goggles to prevent any possibility of eye contact.

Respiratory

If ventilation is insufficient, suitable respiratory protection must be provided. Seek advice from supervisor on the companies' respiratory protection standards.

Skin/Body

Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact.

Environmental

Use engineering controls to reduce air contamination to permissible exposure level.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flammability
---
Form
---
Crystallisation Point
---
Vapor Pressure
---
Relative Evaporation Rate
---
Density
---
Auto Ignition Temperature
---
Colour
Amber
Relative Density
0.850 - 0.950 15°C
Odor
---
Physical State
Oily Liquid
Vapor Density
---
State Under Standard Conditions
---
Appearance
Oily Liquid
Voc Content
---
Kinematic Viscosity
3.0 - 10.0 cSt 40°C
Flash Point
---
Colour Intensity
---
Solidification Point
---
Freezing Point
---
Solubility
Insoluble in water Soluble in Organic solvents
Bulk Density
---
Melting Point
---
Odor Threshold
---
Partition Coefficient
---
Boiling Point
---
Solubility In Water
Insoluble in water
Dynamic Viscosity
---
Softening Point
---
Upper Explosive Limit
---
Decomposition Temperature
---
Lower Explosive Limit
---
Physical State Data
liquid
Metal Corrosion
---
Solubility In Fat
---
Evaporation Rate
---
Molecular Weight
---
Explosive Limits
---
Cloud Point
---
Properties Status
---
Ph
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal temperature conditions and recommended use.

Avoid

Avoid excessive heat for prolonged periods of time.

Incompatible

Strong oxidising substances.

Decomposition

None under normal conditions. Fire or high temperatures create: Oxides of: Carbon.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Disposal to licensed waste disposal site in accordance with local Waste Disposal Authority.

Disposal

Dispose of waste and residues in accordance with local authority requirements.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Not classified.

Chemical Safety Assessment Not performed

Safety phrases: S24/25 (Avoid contact with skin and eyes). P13 (Safety data sheet available for professional user on request). Approved Code of Practice: Safety Data Sheets for Substances and Preparations. Classification and Labelling of Substances and Preparations Dangerous for Supply. Guidance Notes: Workplace Exposure Limits EH40.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BIO-DEGRADABLE LUBE PUMP SPRAY?

The signal word is no signal word.

What is the physical form of BIO-DEGRADABLE LUBE PUMP SPRAY?

BIO-DEGRADABLE LUBE PUMP SPRAY is a oily liquid appearing as oily liquid with amber color.

What is the solubility of BIO-DEGRADABLE LUBE PUMP SPRAY?

Insoluble in water Soluble in Organic solvents

What is BIO-DEGRADABLE LUBE PUMP SPRAY used for?

Lubricant