Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BITUMEN 100/40
- Chemical Name
- Asphalt oxidized
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- 01-2119498270-36-0056
Identified Uses
Mainly used for road paving, Miscellaneous industrial applications
Uses advised against
None unless specified elsewhere in this SDS.
Manufacturers & Suppliers
Iko sales International nv
Truibroek 74, 3945 Ham, Belgium
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No Hazardous Substance(s) required for disclosure.
First Aid Measures
Emergency procedures for chemical exposure incidents
Immediately remove from further exposure. Get immediate medical assistance. Give supplemental oxygen, if available. If breathing has stopped, assist ventilation with a mechanical device.
Wash contact areas with soap and water. If burned by contact with hot material, molten material adhering to skin should be cooled as quickly as possible with water, and see a physician for removal of adhering material and treatment of burn.
Flush thoroughly with water for at least 15 minutes. Get medical assistance.
Symptoms: Eye pain, redness, tearing, swelling of eyelids, itching.
First aid is normally not required. Seek medical attention if discomfort occurs.
Immediate Medical Attention
Get immediate medical assistance.
Medical Treatment
The need to have special means for providing specific and immediate medical treatment available in the workplace is not expected.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use dry chemical, carbon dioxide (CO2), or a dry, non-combustible material such as dry sand or earth to extinguish flames.
DO NOT USE WATER.
Evacuate area. Prevent run-off from fire control or dilution from entering streams, sewers or drinking water supply. Use water spray to cool fire exposed surfaces and to protect personnel.
Firefighter Protection
Fire-fighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
normal work clothes are usually adequate
full body suit of chemical and thermal resistant material is recommended
Prevent entry into waterways, sewers, basements or confined areas.
Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers.
Materials: dry earth, sand or other non-combustible material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid vapour from heated materials to prevent exposure to potentially toxic/irritating fumes. Hydrogen sulphide (H2S) may be given off when this material is heated. Do not depend on sense of smell for warning. When heating to normal handling temperatures, avoid local overheating. Prevent small spills and leakage to avoid slip hazard.
Non-absorbent insulation such as foam glass is recommended for tankage and piping.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The data for this section has not been processed yet.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
See sub-sections below.
Hazardous polymerization will not occur.
Contact of hot product with water., Overheating.
Halogens, Alkalies, Strong Acids, Strong oxidisers
Material does not decompose at ambient temperatures.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3257
- Shipping Name
- ELEVATED TEMPERATURE LIQUID, N.O.S. (Bitumen)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BITUMEN 100/40?
The signal word is no signal word.
What is the physical form of BITUMEN 100/40?
BITUMEN 100/40 is a solid with black color. It has petroleum/solvent odor.
What is BITUMEN 100/40 used for?
Mainly used for road paving, Miscellaneous industrial applications
What is the melting point of BITUMEN 100/40?
The melting point is Not technically feasible and the boiling point is > 400°C (752°F) [Estimated].