Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ICE MELT AERO NEW
- Product Code
- 01760001
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 0K5C-6QAR-PM15-UXHH
Identified Uses
Life cycle stages PW Widespread use by professional workers, Sector of Use SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), Product category PC4 Anti-Freeze and de-icing products, Process category PROC7 Industrial spraying, PROC11 Non industrial spraying, Environmental release category ERC8a Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor), ERC8d Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor), Application of the substance / the mixture Overwintering/ Hibernation agent
Manufacturers & Suppliers
ZEP ITALIA SRL
manufacturer
Piazzale Luigi Cadorna, 2, 20123 Milano (MI) - Italy; Via Nettunense Km. 25.000, 04011 Aprilia (LT) - Italy
+39.06.926691
http://www.zep.it
ZEP Industries BV
manufacturer
Vierlinghweg 30, 4612 PN Bergen op Zoom, The Netherlands
+ 31 164 250 100
ZEP UK Ltd
distributor
Tanhouse Lane, Widnes Cheshire, WA8 0RD, United Kingdom
+44 (0)151 422 1000
http://www.zep.co.uk
Emergency Contacts
NHS
+44 0845 46 47
NHS
+44 08454 24 24 24
emergency number (europe)
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.
Immediately rinse with water. Seek immediate medical advice.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Seek immediate medical advice.
Immediate Medical Attention
Seek medical treatment. Seek immediate medical advice.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water haze, Alcohol resistant foam, Carbon dioxide, Dry sand
During heating or in case of fire poisonous gases are produced.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons from danger area.
Do not allow to enter sewers/ surface or ground water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store in cool, dry place in tightly closed receptacles. Use only in well ventilated areas. Keep respiratory protective device available. Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C, i.e. electric lights. Do not pierce or burn, even after use.
Store in cool, dry place in tightly closed receptacles.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke. Protect from heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
Reacts with flammable substances.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ICE MELT AERO NEW?
The signal word is danger.
What is the physical form of ICE MELT AERO NEW?
ICE MELT AERO NEW is a aerosol with colourless color. It has characteristic odor.
What is ICE MELT AERO NEW used for?
Life cycle stages PW Widespread use by professional workers, Sector of Use SU22 Professional uses: Public domain (administration, education, entertainment, services, craftsmen), Product category PC4 Anti-Freeze and de-icing products, Process category PROC7 Industrial spraying, PROC11 Non industrial spraying, Environmental release category ERC8a Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor), ERC8d Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor), Application of the substance / the mixture Overwintering/ Hibernation agent
What are the hazard statements for ICE MELT AERO NEW?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H373: May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.
What is the melting point of ICE MELT AERO NEW?
The melting point is Undetermined. and the boiling point is 78°C.