Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AMIDO BLACK 10B
- Product Code
- BP124-10
- Synonyms
- Naphthol blue black; C.I. 20470; Aniline Blue Black; 4-Amino-5-hydroxy-3-(p-nitrophenylazo)-6-(phenylazo)-2,7-naphthalenedisulfonic acid, disodium salt; Amido Schwarz
Regulatory Identifiers
- CAS Number
- 1064-48-8 Check regulations →
- EC Number
- 213-903-1 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Fisher Scientific UK
distributor
Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom
Acros Organics BVBA
distributor
Janssen Pharmaceuticalaan 3a 2440 Geel, Belgium
Emergency Contacts
Emergency Contact
001-201-796-7100
Emergency Contact
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| C.I. Acid black 1 EC: 213-903-1 | 1064-48-8 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult, give oxygen. Obtain medical attention.
Wash off immediately with plenty of water for at least 15 minutes. Obtain medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Obtain medical attention.
Immediate Medical Attention
Obtain medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Carbon dioxide (CO₂). Dry chemical. Chemical foam.
No information available.
Fine dust dispersed in air may ignite.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See Section 12 for additional ecological information.
Sweep up or vacuum up spillage and collect in suitable container for disposal.
Related Products
Similar products with comparable safety profiles
Amidoschwarz Färbekonzentrat
CAS: not relevant (mixture)
ASA Black
---
ULTRAMID® 1021HS BLACK POLYAMIDE
---
AL-FIX BLACK
---
COLORMATCH 700 BLACK
---
ULTRAMID® A3WG6 LS BLACK 23189 POLYAMIDE
---
FLEXOCURE EBONY;BLACK FOR BACKING BLACK
---
TECHNOMELT PA 2302 BLACK known as MACROMELT 2302 S 20kg
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation. Wear personal protective equipment. Avoid contact with skin and eyes. Do not ingest. Avoid dust formation. Avoid breathing dust/fume/gas/mist/vapors/spray.
Keep in a dry, cool and well-ventilated place. Keep container tightly closed.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing before re-use. Wash hands before breaks and at the end of workday.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Ensure that eyewash stations and safety showers are close to the workstation location. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source
Protective gloves. Glove material: Nitrile rubber, Neoprene, Natural rubber PVC. Breakthrough time: See manufacturers recommendations. EU standard: EN 374. (minimum requirement)
Goggles (European standard - EN 166)
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particulates filter conforming to EN 143. Small scale/Laboratory use: Use a NIOSH/MSHA or European Standard EN 149:2001 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended half mask:- Particle filtering: EN149:2001. When RPE is used a face piece Fit Test should be conducted
Wear appropriate protective gloves and clothing to prevent skin exposure
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
Hazardous polymerization does not occur. No information available.
Avoid dust formation. To avoid thermal decomposition, do not overheat. Incompatible products.
Strong oxidizing agents. Reducing agents.
Nitrogen oxides (NOx). Carbon monoxide (CO). Carbon dioxide (CO2). Sulfur oxides. Sodium oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is AMIDO BLACK 10B known by?
AMIDO BLACK 10B is also known as: Naphthol blue black; C.I. 20470; Aniline Blue Black; 4-Amino-5-hydroxy-3-(p-nitrophenylazo)-6-(phenylazo)-2,7-naphthalenedisulfonic acid, disodium salt; Amido Schwarz
What is the hazard signal word for AMIDO BLACK 10B?
The signal word is warning.
What is the physical form of AMIDO BLACK 10B?
AMIDO BLACK 10B is a powder solid appearing as dark brown . It has odorless odor.
What is AMIDO BLACK 10B used for?
Laboratory chemicals.
What are the hazard statements for AMIDO BLACK 10B?
This substance has 3 hazard statements:
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
What is the melting point of AMIDO BLACK 10B?
The melting point is No data available and the boiling point is No information available.