NextSDS Logo
Safety Data Sheet EN

Amidoschwarz Färbekonzentrat

CAS not relevant (mixture)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Amidoschwarz Färbekonzentrat
Product Code
354404

Regulatory Identifiers

CAS Number
not relevant (mixture) Check regulations →
REACH No.
not relevant (mixture)

Identified Uses

Laboratory and analytical use

Manufacturers & Suppliers

BIOTEC-FISCHER GmbH logo

BIOTEC-FISCHER GmbH

manufacturer

Daimlerstraße 6, 35447 Reiskirchen, Germany

06408 6072

http://www.biotec-fischer.de

Emergency Contacts

BIOTEC-FISCHER GmbH

06408 6072

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1A H314
Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H314 Causes severe skin burns and eye damage.

Precautionary Statements

P260 Do not breathe mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Formic acid EC: 200-579-1 64-18-6 10 - 25% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Mouth to mouth resuscitation should be avoided. Use alternative methods, preferably with oxygen or compressed air driven apparatus.

Skin contact

Wash with plenty of soap and water. Call a physician immediately.

Symptoms: Causes poorly healing wounds.

Eye contact

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Remove contact lenses, if present and easy to do. Continue rinsing.

Ingestion

Rinse mouth. Do not induce vomiting. Call a physician immediately.

Immediate Medical Attention

Call a physician immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

co-ordinate firefighting measures to the fire surroundings

Instructions

In case of fire and/or explosion do not breathe fumes. Fight fire with normal precautions from a reasonable distance.

Firefighter Protection

In case of fire and/or explosion do not breathe fumes.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove persons to safety. Ventilate affected area.

Environmental

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Cleanup methods

Collect spillage. Place in appropriate containers for disposal.

Materials: Absorbent material (e.g. sand, diatomaceous earth, acid binder, universal binder, sawdust, etc.).

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use local and general ventilation. Do not mix with alkali. Avoid release to the environment. Do not eat, drink and smoke in work areas. Wash hands after use. Preventive skin protection (barrier creams/ointments) is recommended. Remove contaminated clothing and protective equipment before entering eating areas.

Storage

Protect against external exposure, such as heat, frost. Keep away from food, drink and animal feedingstuffs.

Hygiene

Do not eat, drink and smoke in work areas. Wash hands after use. Preventive skin protection (barrier creams/ointments) is recommended. Remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

General ventilation.

Hands

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Material, material thickness, and breakthrough times are not available.

Eyes

Wear eye/face protection.

Respiratory

In case of inadequate ventilation wear respiratory protection.

Environmental

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Relative Density
these information are not available
Colour Intensity
---
Decomposition Temperature
these information are not available
Lower Explosive Limit
these information are not available
Freezing Point
these information are not available
Dynamic Viscosity
these information are not available
Physical State
liquid
Relative Evaporation Rate
---
Cloud Point
---
Bulk Density
---
Evaporation Rate
these information are not available
Density
these information are not available
Appearance
---
Auto Ignition Temperature
these information are not available
Flash Point
not applicable
Explosive Limits
---
Boiling Point
~100 °C
Physical State Data
liquid
Colour
dark blue
Upper Explosive Limit
these information are not available
Molecular Weight
---
Form
fluid
Solubility
---
Solubility In Water
miscible in any proportion
Odor
stinging
State Under Standard Conditions
---
Crystallisation Point
---
Kinematic Viscosity
these information are not available
Vapor Density
these information are not available
Flammability
not relevant (fluid)
Vapor Pressure
these information are not available
Solidification Point
---
Voc Content
---
Ph
<2
Softening Point
---
Metal Corrosion
---
Odor Threshold
these information are not available
Melting Point
these information are not available
Partition Coefficient
these information are not available
Properties Status
---
Solubility In Fat
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

Reactivity

May be corrosive to metals.

Hazardous reactions

No known hazardous reactions.

Avoid

There are no specific conditions known which have to be avoided.

Incompatible

bases, oxidisers, light metals (due to the release of hydrogen in an acid/alkaline medium)

Decomposition

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

This material and its container must be disposed of as hazardous waste.

Disposal

This material and its container must be disposed of as hazardous waste.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1760
Shipping Name
CORROSIVE LIQUID, N.O.S.
Transport Class
8
Packing Group
III
ADR

Provisions for dangerous goods (ADR) should be complied within the premises.

IMDG

223, 274

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

none of the ingredients are listed for the specified regulations

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Amidoschwarz Färbekonzentrat?

The signal word is danger.

What is the physical form of Amidoschwarz Färbekonzentrat?

Amidoschwarz Färbekonzentrat is a liquid with dark blue color. It has stinging odor.

What is Amidoschwarz Färbekonzentrat used for?

Laboratory and analytical use

What are the hazard statements for Amidoschwarz Färbekonzentrat?

This substance has 1 hazard statement:

  • H314: Causes severe skin burns and eye damage.

What is the melting point of Amidoschwarz Färbekonzentrat?

The melting point is these information are not available and the boiling point is ~100 °C.