Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Buffer solution (citric acid/sodium hydroxide/hydrogen chloride) colour: red traceable to SRM from NIST and PTB pH 4.00 (20 °C) Certipur®
- Product Code
- 1.09475
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Millipore
manufacturer
Merck KGaA
manufacturer
Frankfurter Str. 250, D-64271 DARMSTADT
+49 (0)6151 72-0
Emergency Contacts
CHEMTREC (GB)
+(44)-870-8200418
CHEMTREC Ireland
+(353)-19014670
CHEMTREC India
001-803-017-9114
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mixture of 5-Chloro-2-methyl-4-isothiazolin-3-one and 2-Methyl-2H -isothiazol-3-one (3:1) EC: 911-418-6 | 55965-84-9 | 0.0002 - 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air. Consult doctor if feeling unwell.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
For this substance/mixture no limitations of extinguishing agents are given.
Not combustible. Ambient fire may liberate hazardous vapours.
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Firefighter Protection
Stay in danger area only with self-contained breathing apparatus. Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapors, aerosols. Ensure adequate ventilation. Evacuate the danger area, observe emergency procedures, consult an expert.
Do not let product enter drains.
Take up with liquid-absorbent and neutralising material. Clean up affected area.
Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H ⁺ , Merck Art. No. 101595)
Related Products
Similar products with comparable safety profiles
Buffer Solution, pH 4.00, Color-Coded Red
---
Buffer solution pH 7.00 (20 GRAD C) Certipur®
---
Buffer solution pH 4 (phthalate) Traceable to NIST
---
Buffer solution pH 7 (phosphate) Traceable to NIST, Stabilised
---
Buffer solution pH4.00 (colorless), conserved
UFI: XHVV-GPU2-RA75-4C8F
Buffer Solution pH 7.0 (Color-Coded Yellow)
---
Buffer solution pH 8 (borate) Traceable to NIST
UFI: EHPA-P2EM-XX0C-VAS8
Buffer solution pH 10 (borate) Traceable to NIST
UFI: QSPA-62GT-UX0U-VCHF
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Tightly closed.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when vapours/aerosols are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type ABEK. The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
required. protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature) .
No data available
Violent reactions possible with: The generally known reaction partners of water.
no information available
No data available
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.
See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Buffer solution (citric acid/sodium hydroxide/hydrogen chloride) colour: red traceable to SRM from NIST and PTB pH 4.00 (20 °C) Certipur®?
The signal word is no signal word.
What is the physical form of Buffer solution (citric acid/sodium hydroxide/hydrogen chloride) colour: red traceable to SRM from NIST and PTB pH 4.00 (20 °C) Certipur®?
Buffer solution (citric acid/sodium hydroxide/hydrogen chloride) colour: red traceable to SRM from NIST and PTB pH 4.00 (20 °C) Certipur® is a liquid with red color. It has odorless odor.
What is Buffer solution (citric acid/sodium hydroxide/hydrogen chloride) colour: red traceable to SRM from NIST and PTB pH 4.00 (20 °C) Certipur® used for?
Reagent for analysis
What is the melting point of Buffer solution (citric acid/sodium hydroxide/hydrogen chloride) colour: red traceable to SRM from NIST and PTB pH 4.00 (20 °C) Certipur®?
The melting point is No data available and the boiling point is No data available.