Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ABSODAN Plus
- Chemical Name
- Diatomaceous earth (calcined)
- Synonyms
- Diatomaceous earth (moler) granulated, calcined
Regulatory Identifiers
- CAS Number
- 91053-39-3 Check regulations →
- EC Number
- 293-303-4 Check regulations →
- REACH No.
- Exempted in accordance with REACH Annex V.7
Identified Uses
Absorbents
Manufacturers & Suppliers
Imerys Minerals Ltd
distributor
Imerys Technology Centre UK, Par Moor Road, Par, Cornwall, England, PL24 2SQ
+44(0)1726 818000
Imerys Industrial Minerals Denmark A/S
manufacturer
Kønsborgvej 9, DK-7884 Fur
+45 97593222
Emergency Contacts
CHEMTREC
+ 1 703 527 3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Diatomaceous Earth, Calcined | 100%
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Diatomaceous Earth, Calcined EC: 293-303-4 | 91053-39-3 | 100% | No |
Product name ABSODAN Plus EU REACH registration notes Exempted in accordance with REACH Annex V.7 Ingredient notes This is a UVCB substance. This product does not contain any SVHC substances at levels greater than 0.1 % by weight.
Notes
This product contains less than 1% crystalline silica (fine fraction) consisting of cristobalite (fine fraction) and quartz (fine fraction). Cristobalite: CAS-No.: 14464-46-1 EC No.: 238-455-4. Quartz: CAS-No.: 14808-60-7 EC No.: 238-878-4. The classification of the product is shown in section 2 of this safety data sheet.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Get medical attention if any discomfort continues.
Wash skin thoroughly with soap and water. Use suitable lotion to moisturise skin.
Do not rub eye. Rinse with copious quantities of water and seek medical attention if irritation persists.
Symptoms: irritation
Rinse mouth thoroughly with water. Get medical attention if any discomfort continues.
Immediate Medical Attention
No specific recommendations.
Medical Treatment
No specific recommendations.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
This product is non-combustible. No specific extinguishing media is needed. Use fire-extinguishing media suitable for the surrounding fire.
No restriction on the extinguishing media to be used.
Non combustible.
Use an extinguishing agent suitable for the surrounding fire.
Firefighter Protection
No specific fire-fighting protection is required. Use an extinguishing agent suitable for the surrounding fire. Product on floor when wetted will become slippery and may present a hazard; wear anti-slip boots.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid airborne dust generation, wear personal protective equipment in compliance with national legislation. Product on floor when wetted will become slippery and may present a hazard; wear anti-slip boots.
Do not discharge into drains or watercourses or onto the ground.
Avoid dry sweeping and use water spraying or vacuum cleaning systems to prevent airborne dust generation.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid airborne dust generation. Provide appropriate exhaust ventilation at places where airborne dust is generated. In case of insufficient ventilation, wear suitable respiratory protective equipment. Handle packaged products carefully to prevent accidental bursting. Product on floor when wetted will become slippery and may present a hazard; wear anti-slip boots.
Store in a dry covered area. Keep containers closed and store packaged products so as to prevent accidental bursting.
Do not eat, drink and smoke in work areas; wash hands after use; remove contaminated clothing and protective equipment before entering eating areas. Keep dust levels to a minimum. Minimize dust generation. General occupational hygiene measures are required. These include good personal and housekeeping practices (i.e. regular cleaning with suitable cleaning devices). Shower and change clothes at end of work shift. Change work clothing daily before leaving workplace.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperatures and when used as recommended.
The following materials may react with the product: Hydrofluoric acid
Silicon tetrafluoride (SiF4) will form upon contact with hydrofluoric acid.
Avoid contact with the following materials: Hydrofluoric acid
Hydrofluoric acid
Silicon tetrafluoride (SiF4) will form upon contact with hydrofluoric acid.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Avoid any release of dust during transportation, by using air-tight tanks for powders and covered trucks for other dry forms.
Avoid any release of dust during transportation, by using air-tight tanks for powders and covered trucks for other dry forms.
Avoid any release of dust during transportation, by using air-tight tanks for powders and covered trucks for other dry forms.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is ABSODAN Plus known by?
ABSODAN Plus is also known as: Diatomaceous earth (moler) granulated, calcined
What is the hazard signal word for ABSODAN Plus?
The signal word is no signal word.
What is the physical form of ABSODAN Plus?
ABSODAN Plus is a granules. appearing as granules. . It has odourless. odor.
What is the solubility of ABSODAN Plus?
Insoluble in water.
What is ABSODAN Plus used for?
Absorbents
What are the hazard statements for ABSODAN Plus?
This substance has 1 hazard statement:
- Not Classified
What is the melting point of ABSODAN Plus?
The melting point is > 450°C EU Method A1 Read-across data: Kaolin and the boiling point is not applicable (Solid with a melting point > 450°C).