NextSDS Logo
Safety Data Sheet EN

Osmafin Aquablock Triple

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Osmafin Aquablock Triple
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Main use category : Professional use Use of the substance/mixture : Hydrofobing agent / water repellent

Uses advised against

No additional information available

Manufacturers & Suppliers

Christeyns NV logo

Christeyns NV

manufacturer

Afrikalaan 182, 9000 GENT, Belgium

+32 (0)9/ 223 38 71

http://www.christeyns.com

Christeyns UK Ltd. logo

Christeyns UK Ltd.

distributor

Rutland Street, GB– Bradford BD4 7EA, United Kingdom

+44 (0)1274 39 32 86

http://www.christeyns.com

Christeyns Food Hygiene Ltd. Ltd logo

Christeyns Food Hygiene Ltd. Ltd

distributor

2, Cameron Court, Winwick Quay, GB– WA2 8RE Warrington – Cheshire, United Kingdom

+44 (0)1925 23 46 96

http://www.christeyns.com

Emergency Contacts

National Poisons Information Centre Beaumont Hospital

+353 1 809 2566

24/7

National Poisons Information Centre Beaumont Hospital

+353 1 809 2166

8am - 10pm, 7/7

National Poisons Information Service (Birmingham Centre) City Hospital

0344 892 0111

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of REACH Annex II

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Take victim to fresh air, in a quiet place and if necessary take medical advice.

Symptoms: Presents no particular risk when handled in accordance with good occupational hygiene practice.

Skin contact

Take off immediately all contaminated clothing. Wash off with plenty of water. In case of faintness or symptoms of skin irritation appear, take medical advice.

Symptoms: To our knowledge, this product does not present any particular risk, provided it is handled in accordance with good occupational hygiene and safety practice.

Eye contact

Rinse immediately and thoroughly, pulling the eyelids well away from the eye (15 minutes minimum). If eye irritation persists, take medical advice.

Symptoms: To our knowledge, this product does not present any particular risk, provided it is handled in accordance with good occupational hygiene and safety practice.

Ingestion

Rinse mouth with water, do not induce vomiting, call a doctor.

Symptoms: Presents no particular risk when handled in accordance with good occupational hygiene practice.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

All extinguishing agents can be used.

Specific hazards

Explosion hazard: Not applicable.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Prevent entry to sewers and public waters. Avoid release to the environment.

Cleanup methods

Absorb spilled material with sand or earth. Shovel or sweep up and put in a closed container for disposal. Rinse with water.

Materials: sand or earth

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes. After use, container has to be completely emptied and closed. Never return unused material to original container.

Storage

Keep only in original container. Store tightly closed in a dry and cool place.

Hygiene

Do not eat, drink or smoke when using this product. Take off immediately all contaminated clothing and wash it before reuse. Always wash hands after handling the product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Chemical resistant PVC gloves (to European standard EN 374 or equivalent)

Eyes

Safety glasses with side-shields (EN 166)

Respiratory

No personal breathing protective equipment is normally required.

Skin/Body

No special required clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Beige.
Colour Intensity
---
Form
Liquid.
Odor
Slight.
Odor Threshold
Not available
Ph
4.8 ± 0,5 (100%); 6,7 ± 0,5 (1%)
Melting Point
Not determined as it is not relevant for the characterization of the product
Boiling Point
Not determined as it is not relevant for the characterization of the product
Flash Point
> 95 °C
Freezing Point
Not determined as it is not relevant for the characterization of the product
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
23 hPa
Vapor Density
---
Relative Density
Not available
Bulk Density
---
Density
1 kg/l
Flammability
Not determined as it is not relevant for the characterization of the product
Upper Explosive Limit
Constituents do not contain chemical groups associated with explosivity
Lower Explosive Limit
Constituents do not contain chemical groups associated with explosivity
Explosive Limits
---
Auto Ignition Temperature
Determination of the auto-ignition temperature is only relevant for pyrophoric liquids, however the mixture is not a pyrophoric liquid so the test is not required.
Decomposition Temperature
Only applies to self-reactive substances and mixtures, organic peroxides, and other substances and mixtures that may decompose.
Solubility
Water: Miscible
Partition Coefficient
Does not apply to inorganic and ionic liquids and does not generally apply to mixtures.
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
< 30 mPa·s
Kinematic Viscosity
< 30 mm²/s
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if stored normally.

Reactivity

No additional information available

Hazardous reactions

No additional information available

Avoid

Temperatures below 0°C.

Incompatible

Never mix with other materials.

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Osmafin Aquablock Triple?

The signal word is no signal word.

What is the physical form of Osmafin Aquablock Triple?

Osmafin Aquablock Triple is a liquid with beige. color. It has slight. odor.

What is the solubility of Osmafin Aquablock Triple?

Water: Miscible

What is Osmafin Aquablock Triple used for?

Main use category : Professional use Use of the substance/mixture : Hydrofobing agent / water repellent

What is the melting point of Osmafin Aquablock Triple?

The melting point is Not determined as it is not relevant for the characterization of the product and the boiling point is Not determined as it is not relevant for the characterization of the product.