NextSDS Logo
Safety Data Sheet EN

Osmaflux Profi

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Osmaflux Profi
Product Code
700

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Detergent

Uses advised against

No additional information available

Manufacturers & Suppliers

Christeyns NV logo

Christeyns NV

manufacturer

Afrikalaan 182, 9000 GENT - België

+32 (0)9/ 223 38 71

http://www.christeyns.com

Emergency Contacts

Guy's & St Thomas' Poisons Unit Medical Toxicology Unit, Guy's & St Thomas' Hospital Trust

0870 243 2241

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1A H314
Aquatic Chronic Cat. 3 H412

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H314 Causes severe skin burns and eye damage.
H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P280 Wear eye protection, protective gloves, protective clothing
P303 + P361 + P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P310 Immediately call a POISON CENTER or doctor/physician

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Potassium hydroxide EC: 215-181-3 1310-58-3 10 - 15% Yes
Alcohol ethoxylated propoxylated 120313-48-6 5 - 10% Yes
Ethoxylated Alcohol --- 3 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Take victim to fresh air, in a quiet place and if necessary take medical advice.

Symptoms: Presents no particular risk when handled in accordance with good occupational hygiene practice.

Skin contact

Remove all contaminated clothing and footwear. Wash immediately with plenty of water. Ask for medical advice.

Symptoms: Burns.

Eye contact

Rinse immediately and thoroughly, pulling the eyelids well away from the eye (15 minutes minimum). Seek urgent medical help.

Symptoms: Corrosive to eyes.

Ingestion

Rinse mouth out with water. Do NOT induce vomiting. Immediately consult a doctor/medical service.

Symptoms: Burns of the upper digestive and respiratory tracts.

Immediate Medical Attention

In case of doubt or persistent symptoms, consult always a physician. Seek urgent medical help for eye contact. Immediately consult a doctor/medical service for ingestion.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

All extinguishing agents can be used.

Specific hazards

Explosion hazard : Not applicable.

Firefighter Protection

Use self-contained breathing apparatus and chemically protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel.

Environmental

Prevent entry to sewers and public waters.

Cleanup methods

Absorb spilled material with sand or earth. Shovel or sweep up and put in a closed container for disposal.

Materials: sand or earth

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with skin and eyes. Never return unused material to original container.

Storage

Keep only in the original container. Keep out of frost. Keep container tightly closed in a cool place.

Hygiene

Do not eat, drink or smoke when using this product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate ventilation

Hands

Chemical resistant PVC/Nitrilrubber gloves (to European standard EN 374 or equivalent). Thickness: 0,4 mm. Penetration time: >480 min (level 6). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.

Eyes

Safety glasses with side-shields (EN 166)

Skin/Body

Wear suitable protective clothing (EN 14605)

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Vapor Density
---
Properties Status
---
Odor Threshold
No data available
Voc Content
---
Odor
Slight.
Dynamic Viscosity
515 ± 100 mPa.s
Colour
Yellow.
Bulk Density
---
Solubility
No data available
Metal Corrosion
---
Evaporation Rate
---
Solubility In Water
---
Solidification Point
---
Relative Density
No data available
Physical State
Liquid
Freezing Point
No data available
State Under Standard Conditions
---
Crystallisation Point
---
Auto Ignition Temperature
No data available
Boiling Point
>= 100 °C
Appearance
---
Decomposition Temperature
No data available
Colour Intensity
---
Ph
13,8 ± 0,5 (100%);12,3 ± 0,5 (1 %)
Physical State Data
liquid
Density
1255 ± 25 kg/m3
Vapor Pressure
No data available
Melting Point
No data available
Softening Point
---
Form
---
Flash Point
Not applicable
Cloud Point
---
Partition Coefficient
No data available
Molecular Weight
---
Solubility In Fat
---
Relative Evaporation Rate
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Kinematic Viscosity
---
Upper Explosive Limit
No data available
Flammability
Not applicable
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No decomposition if stored normally.

Reactivity

No additional information available

Hazardous reactions

No additional information available

Avoid

humid air. Keep out of frost.

Incompatible

Never mix with other materials.

Decomposition

Hazardous decomposition products may be released during prolonged heating like smokes, carbon monoxide and dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1814
Shipping Name
POTASSIUM HYDROXIDE SOLUTION
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Osmaflux Profi?

The signal word is danger.

What is the physical form of Osmaflux Profi?

Osmaflux Profi is a liquid with yellow. color. It has slight. odor.

What is the solubility of Osmaflux Profi?

No data available

What is Osmaflux Profi used for?

Detergent

What are the hazard statements for Osmaflux Profi?

This substance has 2 hazard statements:

  • H314: Causes severe skin burns and eye damage.
  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of Osmaflux Profi?

The melting point is No data available and the boiling point is >= 100 °C.