Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TB-21 WELD CLEANING FLUID FOR STAINLESS STEEL
- Synonyms
- TB21 WELD CLEANING FLUID • WELD CLEANING FLUID
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
TIG BRUSH WELD CLEANING SOLUTION FOR STAINLESS STEEL
Manufacturers & Suppliers
ENSITECH INC
manufacturer
340 Marshall Avenue, Bldg#104, Aurora, Illinois, 60506, UNITED STATES
+1 630 405 6440
http://www.tigbrush.com
Emergency Contacts
Emergency Contact
+1 352-323-3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| PHOSPHORIC ACID EC: 616-646-7 | 7664-38-2 | 23 - 24% | No |
| NON HAZARDOUS INGREDIENTS | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.
If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.
If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre, a doctor, or for at least 15 minutes.
If swallowed, do not induce vomiting.
Immediate Medical Attention
For advice, contact the Poison Control Centre at 1-800-222-1222 or a doctor (at once).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use an extinguishing agent suitable for the surrounding fire.
Non flammable. May evolve toxic gases (phosphorus oxides) when heated to decomposition. Contact with most metals may evolve flammable hydrogen gas.
Treat as per requirements for surrounding fires. Use waterfog to cool intact containers and nearby storage areas.
Firefighter Protection
Wear full protective equipment including Self Contained Breathing Apparatus (SCBA) when combating fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear Personal Protective Equipment (PPE) as detailed in section 8 of the SDS. Clear area of all unprotected personnel. Ventilate area where possible. Contact emergency services where appropriate.
Prevent product from entering drains and waterways.
Collect for complete neutralisation and appropriate disposal.
Related Products
Similar products with comparable safety profiles
TB-25 WELD CLEANING FLUID FOR STAINLESS STEEL (AU)
---
STAINLESS STEEL CLEANER & POLISH
---
3MTM Stainless Steel Cleaner & Polish
---
Stainless Steel Cleaner & Polish
---
WHITE LIGHTNIN' Acid Based Aluminum Bightener & Stainless Steel Cleaner
---
FRAGOLTHERM® Cleaning Fluid 350
CAS: 61788-32-7
WINDEX® GLASS CLEANER
---
BYK-SILCLEAN 3710
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Before use carefully read the product label. Use of safe work practices are recommended to avoid eye or skin contact and inhalation. Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas. This solution should not be used in a spraying application.
Store in a cool, dry, well ventilated area, removed from incompatible substances and foodstuffs.
Observe good personal hygiene, including washing hands before eating. Prohibit eating, drinking and smoking in contaminated areas.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical extraction ventilation is recommended.
Wear PVC or rubber gloves.
Wear splash-proof goggles.
Where an inhalation risk exists, wear a Type B (acid gas) respirator.
Wear coveralls.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended conditions of storage.
May be corrosive to metals.
Polymerization is not expected to occur under normal conditions.
Avoid heat, sparks, open flames and other ignition sources.
oxidising agents (e.g. hypochlorites), alkalis (e.g. sodium hydroxide) and metals.
May evolve toxic gases (phosphorus oxides) when heated to decomposition.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1805
- Shipping Name
- PHOSPHORIC ACID, SOLUTION
- Transport Class
- 8
- Packing Group
- III
F-A, S-B
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TB-21 WELD CLEANING FLUID FOR STAINLESS STEEL known by?
TB-21 WELD CLEANING FLUID FOR STAINLESS STEEL is also known as: TB21 WELD CLEANING FLUID • WELD CLEANING FLUID
What is the hazard signal word for TB-21 WELD CLEANING FLUID FOR STAINLESS STEEL?
The signal word is warning.
What is the physical form of TB-21 WELD CLEANING FLUID FOR STAINLESS STEEL?
TB-21 WELD CLEANING FLUID FOR STAINLESS STEEL is a liquid appearing as orange liquid . It has sweet odour odor.
What is TB-21 WELD CLEANING FLUID FOR STAINLESS STEEL used for?
TIG BRUSH WELD CLEANING SOLUTION FOR STAINLESS STEEL
What are the hazard statements for TB-21 WELD CLEANING FLUID FOR STAINLESS STEEL?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of TB-21 WELD CLEANING FLUID FOR STAINLESS STEEL?
The melting point is < 0°C and the boiling point is 100°C (Approximately).