NextSDS Logo
Safety Data Sheet EN

Desinfectz 2,5%

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Desinfectz 2,5%
Product Form
liquid

Regulatory Identifiers

CAS Number
N/A

Identified Uses

PC8 Biocidal products, Disinfecting liquid, PT02, PT03, PT04

Uses advised against

Professional use only

Manufacturers & Suppliers

The Oxide logo

The Oxide

manufacturer

Dillenburgstraat 26E, 5662 AP Eindhoven

+31 6 5498 0701

http://www.theoxide.nl

Emergency Contacts

Toxbase

+44 844 8920111

members of the public

+44 845 4647

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.

Precautionary Statements

P261 Avoid breathing mist/vapours/spray.
P264 Wash thoroughly after handling.
P280 Wear eye protection / face protection.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of substances listed below, possibly with non-hazardous additions.

Chemical Name CAS Number Concentration Hazardous
L-Lactic acid (2-hydroxy propionic acid) EC: 201-196-2 79-33-4 2.5% Yes
hydrogen peroxide solution EC: 231-765-0 7722-84-1 2.5% Yes
oxygen-based bleaching agents --- 5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove the victim into fresh air, and keep at rest in a position that facilitates breathing. Seek medical treatment in case of complaints.

Symptoms: Coughing, Breathing difficulty

Skin contact

Take off contaminated clothing immediately and wash the skin with plenty of water (possibly showering). If skin irritation continues, consult a doctor.

Eye contact

If possible, remove contact lenses. Rinse opened eye for several minutes (at least 15 minutes) under running water. If symptoms persist, consult a doctor.

Ingestion

DO NOT INDUCE VOMITING! Drink plenty of water and provide fresh air. Call for a doctor immediately.

Immediate Medical Attention

Call for a doctor immediately. Seek medical treatment in case of complaints. Consult a doctor if skin irritation continues or symptoms persist.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use fire extinguishing methods suitable to surrounding conditions. Foam, Alcohol resistant foam, Water spray

Unsuitable media

Carbon dioxide, Extinguishing powder

Specific hazards

No further relevant information available.

Instructions

Cool endangered tanks with water spray.

Firefighter Protection

Mouth respiratory protective device. Wear self-contained respiratory protective device.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear protective equipment. Keep unprotected persons away. Avoid breathing vapor and contact with eyes, skin and clothing.

Environmental

Prevent seepage into sewage system, workpits and cellars. Do not allow to enter sewers/ surface or ground water.

Cleanup methods

Absorb with liquid-binding material

Materials: sand, diatomite, acid binders, universal binders, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety procedures. Avoid inhalation of vapors and contact with eyes, skin and clothing.

Storage

Keep in a cool, dry place, protected from direct sunlight.

Hygiene

Do not eat, drink or smoke while working.

Fire prevention

Keep respiratory protective device available.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ventilation, local exhaust ventilation (if possible along the floor)

Hands

Not required.

Eyes

Tightly sealed goggles. Use safety glasses that meets the requirements of EN 166; latest versions.

Respiratory

Not necessary if room is well-ventilated.

Skin/Body

Not required.

Environmental

Prevent spills from reaching surface waters or soil.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid.
Colour
Colourless.
Colour Intensity
---
Form
Liquid.
Odor
Odourless.
Odor Threshold
Not determined.
Ph
2.4
Melting Point
Not determined.
Boiling Point
115 °C
Flash Point
Not applicable.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
1 hPa
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
1.01 g/cm³
Flammability
Not applicable.
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
Product is not self-igniting.
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Fully miscible.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
<50 mPas
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Reactivity

Reacts violently with bases.

Hazardous reactions

Reacts with alkali (lyes).

Avoid

Avoid storing at high temperatures (>30°C) to prevent degradation of the material or pressure build-up.

Incompatible

Strong bases, Reducing Agents, Oxidising Agents

Decomposition

Oxygen

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Desinfectz 2,5%?

The signal word is warning.

What is the physical form of Desinfectz 2,5%?

Desinfectz 2,5% is a liquid appearing as liquid. with colourless. color. It has odourless. odor.

What is Desinfectz 2,5% used for?

PC8 Biocidal products, Disinfecting liquid, PT02, PT03, PT04

What are the hazard statements for Desinfectz 2,5%?

This substance has 1 hazard statement:

  • H319: Causes serious eye irritation.

What is the melting point of Desinfectz 2,5%?

The melting point is Not determined. and the boiling point is 115 °C.