Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Actisan-5L
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Disinfectant for surfaces.
Uses advised against
Simultaneous use with detergents.
Manufacturers & Suppliers
VEIP bv
Molenvliet 1, 3960 BB Wijk bij Duurstede, The Netherlands
+31 343 57 22 44
Emergency Contacts
Emergency Contact
+31 343 57 22 44
National Poisons Information Centre
+31 30 274 88 88
National Poisons Information Service
844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium dichloroisocyanurate dihydrate EC: 220-767-7 | 51580-86-0 | 99% | Yes |
| Additives | --- | 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air, rest. Get medical advice / attention if you feel unwell.
Symptoms: May cause a disease of the mucous membranes of the upper respiratory tract in persons who are hypersensitive to chlorine.
Remove contaminated clothes, rinse skin with water or shower.
Symptoms: Intensive contact with the skin may cause skin disease (eczema).
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do; continue rinsing. If eye irritation persists: call a doctor / physician.
Rinse mouth, drink plenty of water and call a doctor / physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Powder, water spray.
Carbon dioxide.
In case of fire the product emits toxic fumes including hydrogen chloride, nitrogen- and carbonoxides.
In case of fire: keep containers cool by spraying with water.
Firefighter Protection
Protective clothing, self-contained respiratory protective.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep away from drains, surface water or soil.
Wash away any residue with water. Collect rinse water.
Materials: water
Related Products
Similar products with comparable safety profiles
Biestral 5L
UFI: W001-G0DM-A00K-G2ND
LOCTITE ABLESTIK ABP 2025DNP 5CC SY
---
LOCTITE EA 9359.3 AERO PART B 5GAL known as EA 9359.3 PART B 5 GALLON
---
LOCTITE BZ 9120 5GAL AERO known as Epsilon 99120 5 Gallon
---
LOCTITE STYCAST US 5500 PTA known as HYSOL US5500 PART A 5 GAL A3
---
LOCTITE STYCAST ES 6510 PTA known as HYSOL ES6510 PART A 5 GAL
---
LOCTITE STYCAST ES 0500LC PTB known as HYSOL ES0500LC PART B 55 GAL
---
LOCTITE EA 9313 AERO PART A 5GAL known as EA 9313 PART A 5 GALLON
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use in well-ventilated areas only. Wear suitable protective clothing and gloves.
Store in a dry place. Keep cool.
Keep in a fire-resistant place separate from acids, flammable substances, reducing agents and ammonium compounds.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ventilation and local extraction.
Gloves butyl rubber 0.7 mm gloves (Breakthrough time > 8 hours (NEN-EN 374)); Gloves nitril rubber 0.7 mm gloves (Breakthrough time > 8 hours (NEN-EN 374)); Gloves inear low-density polyethylene (LLDPE) 0.75 mm gloves (Breakthrough time > 8 hours (NEN-EN 374))
Upon release of dust: safety goggles (NEN-EN 166).
Upon release of dust: Respirator filter mask type P2 (NEN-EN 143).
Protective clothing (NEN-EN 340).
Remove contaminated air from the local extractor and drain waste water in accordance with local environmental regulations.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable when stored at normal ambient temperature.
A solution in water has oxidising properties.
No hazardous reaction if instructions for handling and storage are observed.
prolonged exposure to temperatures above 60 °C
Acids, flammable substances, reducing agents and ammonium compounds.
Does not decompose if used and stored as directed. Chlorine-containing gases can be released upon decomposition through contact with moisture.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (sodium dichloroisocyanurate dihydrate)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Actisan-5L?
The signal word is warning.
What is the physical form of Actisan-5L?
Actisan-5L is a solid with white color. It has chlorine-like odor.
What is Actisan-5L used for?
Disinfectant for surfaces.
What are the hazard statements for Actisan-5L?
This substance has 5 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Actisan-5L?
The melting point is 240 (decomposition) °C and the boiling point is Not applicable..