Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE STYCAST ES 0500LC PTB known as HYSOL ES0500LC PART B 55 GAL
- Product Form
- Epoxy Hardener
- Product Code
- EB0510-C20A1
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Substituted anhydride | --- | 30 - 60% | Yes |
| Organic anhydride | --- | 10 - 30% | Yes |
| Phthalic anhydride | 85-44-9 | 1 - 5% | Yes |
| Andydride | --- | 1 - 5% | Yes |
| Resin | --- | 10 - 30% | Yes |
| Bicyclic amidine | --- | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing and footwear. Get medical attention. Wash clothing before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Do not induce vomiting. Never give anything by mouth to an unconscious person. If individual is conscious, wash out mouth with water. Get immediate medical attention.
Immediate Medical Attention
Get medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
In case of fire, keep containers cool with water spray.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Ensure adequate ventilation. Isolate area. Keep unnecessary personnel away. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Store in a closed container until ready for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE STYCAST ES 0514 PTA known as HYSOL ES0514 PART A EU 55 GAL
---
LOCTITE STYCAST ES 6510 PTA known as HYSOL ES6510 PART A 5 GAL
---
LOCTITE STYCAST US 5536 PTA known as HYSOL US5536 PART A 5 GAL
---
LOCTITE STYCAST US 5514 PTA known as HYSOL US5514 PART A 5 GAL
---
LOCTITE STYCAST ES 4412 PTB known as HYSOL ES4412 PART B GAL
---
LOCTITE STYCAST US 5500 PTA known as HYSOL US5500 PART A 5 GAL A3
---
LOCTITE STYCAST US 5529 PTA known as HYSOL US5529 PART A 5 GAL A3
---
LOCTITE STYCAST ES 4412 PTA known as HYSOL ES4412 PART A GAL
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Remove all sources of ignition. Refer to Section 8.
Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Wash thoroughly after handling.
Remove all sources of ignition. Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from open flames, hot surfaces and sources of ignition. Store away from incompatible materials.
Water, amines, alkalis and alcohols. Hydrolyzes in presence of: Water.
Oxides of carbon. Irritating organic vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE STYCAST ES 0500LC PTB known as HYSOL ES0500LC PART B 55 GAL?
The signal word is danger.
What is the physical form of LOCTITE STYCAST ES 0500LC PTB known as HYSOL ES0500LC PART B 55 GAL?
LOCTITE STYCAST ES 0500LC PTB known as HYSOL ES0500LC PART B 55 GAL is a liquid with amber color. It has ammoniacal odor.
What are the hazard statements for LOCTITE STYCAST ES 0500LC PTB known as HYSOL ES0500LC PART B 55 GAL?
This substance has 4 hazard statements:
- H315: CAUSES SKIN IRRITATION.
- H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
- H318: CAUSES SERIOUS EYE DAMAGE.
- H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
What is the melting point of LOCTITE STYCAST ES 0500LC PTB known as HYSOL ES0500LC PART B 55 GAL?
The melting point is Not available. and the boiling point is > 307 °C (> 584.6 °F).