Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Liebherr Gear Hypoid 90 EP
- Product Code
- 18023, 21023
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Motor vehicle lubricant
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
LIEBHERR-LOGISTICS GmbH
manufacturer
St. Vitus 1, D - 88457 Kirchdorf an der Iller
+49 (0) 73 54 / 80-6060
LIEBHERR-COMPONENTS BIBERACH GmbH
manufacturer
Hans-Liebherr-Strasse 45, D - 88400 Biberach an der Riß
LIEBHERR-WERK BIBERACH GmbH
manufacturer
Memminger Straße 120, D - 88400 Biberach an der Riß
LIEBHERR-WERK EHINGEN GmbH
manufacturer
Dr.-Hans-Liebherr-Strasse 1, D - 89584 Ehingen
LIEBHERR-MISCHTECHNIK GmbH
manufacturer
Im Elchgrund 12, D - 88427 Bad Schussenried
LIEBHERR-MINING EQUIPMENT COLMAR SAS
manufacturer
49 rue Frédéric Hartmann, CS 50038, F - 68025 Colmar Cedex
LIEBHERR-WERK NENZING GmbH
manufacturer
Dr.-Hans-Liebherr-Strasse 1, A - 6710 Nenzing
Liebherr-Lubricants
manufacturer
Emergency Contacts
Emergency Contact
1-800-424-9300
Emergency Contact
+ 49 (0) 73 54 / 80-6060
During working hours (CET)
CHEMTREC
+1-703-527-3887
24 hours
CHEMTREC
+1-703-741-5970
24 hours
Emergency Contact
+(44)-870-8200418
Emergency Contact
+(31)-858880596
Emergency Contact
+(61)-290372994
Emergency Contact
0-800-983-611
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amine phosphate EC: 931-384-6 | --- | 1 - 2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call for medical help immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO₂, sand, extinguishing powder. Use fire extinguishing methods suitable to surrounding conditions.
Do not use water with full jet.
In case of fire, the following can be released: Nitrogen oxides (NOx), Carbon monoxide (CO), Sulphur oxide (SOx)
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Particular danger of slipping on leaked/spilled product.
Do not allow to enter sewers, surface or ground water. Prevent from spreading (e.g. by damming-in or oil barriers).
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When handling product in drums use safety footwear and suitable tools. At work please do not eat, drink or smoke.
Store in cool, dry place in tightly closed receptacles.
At work please do not eat, drink or smoke.
Fire class DIN EN 2: B
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Safety gloves of nitrile rubber or viton. Preventive skin protection by use of skin-protecting agents is recommended. Material of gloves: Fluorocarbon rubber (Viton), Nitrile rubber, NBR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. Value for the permeation: Level = 6 (480 min)
Goggles recommended during refilling.
No respiratory protection is ordinarily required under normal conditions of use. Select a filter suitable for combined particulate/ gases and organic vapours (boiling point > 65 ° C, AP2, EN 14387), if exposure limit is exceeded or when aerosol or mist is formed.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
See 10.2 to 10.6
Reacts with strong oxidising agents.
Avoid contact with heat, sparks, flames and all other sources of ignition.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Liebherr Gear Hypoid 90 EP?
The signal word is no signal word.
What is the physical form of Liebherr Gear Hypoid 90 EP?
Liebherr Gear Hypoid 90 EP is a liquid with brown color. It has mild odor.
What is Liebherr Gear Hypoid 90 EP used for?
Motor vehicle lubricant
What is the melting point of Liebherr Gear Hypoid 90 EP?
The melting point is Not determined. and the boiling point is Not determined..