Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Liebherr Universalfett 9900
- Product Code
- 18014, 21014
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricating grease
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
LIEBHERR-LOGISTICS GmbH
manufacturer
St. Vitus 1, D - 88457 Kirchdorf an der Iller
+49 (0) 73 54 / 80-6060
LIEBHERR-COMPONENTS BIBERACH GmbH
manufacturer
Hans-Liebherr-Strasse 45, D - 88400 Biberach an der Riß
+49 (0) 73 54 / 80-6060
LIEBHERR-WERK BIBERACH GmbH
manufacturer
Memminger Straße 120, D - 88400 Biberach an der Riß
+49 (0) 73 54 / 80-6060
LIEBHERR-WERK EHINGEN GmbH
manufacturer
Dr.-Hans-Liebherr-Strasse 1, D - 89584 Ehingen
+49 (0) 73 54 / 80-6060
LIEBHERR-MISCHTECHNIK GmbH
manufacturer
Im Elchgrund 12, D - 88427 Bad Schussenried
+49 (0) 73 54 / 80-6060
LIEBHERR-MINING EQUIPMENT COLMAR SAS
manufacturer
49 rue Frédéric Hartmann, CS 50038, F - 68025 Colmar Cedex
+49 (0) 73 54 / 80-6060
LIEBHERR-WERK NENZING GmbH
manufacturer
Dr.-Hans-Liebherr-Strasse 1, A - 6710 Nenzing
+49 (0) 73 54 / 80-6060
Liebherr-Lubricants
manufacturer
Emergency Contacts
Emergency Contact
+ 49 (0) 73 54 / 80-6060
During working hours (CET)
CHEMTREC
+1-703-527-3887
24 hours
CHEMTREC
+1-703-741-5970
24 hours
Emergency Contact
+(44)-870-8200418
Emergency Contact
+(31)-858880596
Emergency Contact
+(61)-290372994
Emergency Contact
0-800-983-611
Emergency Contact
1-800-424-9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of base oils with thickener and additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zinc bis(2-ethylhexanoate) EC: 205-251-1 | 136-53-8 | 0.1 - 10% | Yes |
| Zinc bis[O,O-bis(2-ethylhexyl)] bis(dithiophosphate) EC: 224-235-5 | 4259-15-8 | 1 - 2.5% | Yes |
| Phosphorodithioic acid, mixed O,O-bis(iso-Bu and pentyl) esters, zinc salts EC: 270-608-0 | 68457-79-4 | 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call for medical help immediately (if swallowed).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, sand, extinguishing powder. Use fire extinguishing methods suitable to surrounding conditions.
Do not use water with full jet.
In case of fire, the following can be released: Nitrogen oxides (NO$_{x}$), Carbon monoxide (CO), Sulphur oxide (SO$_{x}$)
Do not inhale explosion gases or combustion gases.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective clothing. Particular danger of slipping on leaked/spilled product.
Do not allow to enter sewers, surface or ground water.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When handling product in drums use safety footwear and suitable tools.
Store in cool, dry place in tightly closed receptacles.
At work please do not eat, drink or smoke.
Fire class DIN EN 2: B
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. Safety gloves of nitrile rubber or viton. Preventive skin protection by use of skin-protecting agents is recommended. Material of gloves: Fluorocarbon rubber (Viton), Nitrile rubber, NBR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. Value for the permeation: Level = 6 (480 min)
Safety glasses with side shields or chemical goggles are required.
No respiratory protection is ordinarily required under normal conditions of use. Select a filter suitable for combined particulate/ gases and organic vapours (boiling point > 65 ° C, AP2, EN 14387), if exposure limit is exceeded or when aerosol or mist is formed.
Protective work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
See 10.2 to 10.6
Reacts with strong oxidising agents.
Avoid contact with heat, sparks, flames and all other sources of ignition.
No further relevant information available.
Oxides of carbon, nitrogen, sulfur and metal oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Liebherr Universalfett 9900?
The signal word is warning.
What is the physical form of Liebherr Universalfett 9900?
Liebherr Universalfett 9900 is a pasty with beige color. It has characteristic odor.
What is Liebherr Universalfett 9900 used for?
Lubricating grease
What are the hazard statements for Liebherr Universalfett 9900?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of Liebherr Universalfett 9900?
The melting point is > 280 °C and the boiling point is > 250 °C.