Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RENOLIT EP 2
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricating grease
Uses advised against
No uses advised against identified.
Manufacturers & Suppliers
FUCHS LUBRICANTS (UK) PLC.
manufacturer
New Century Street, Hanley, Stoke-on-Trent, Staffordshire, ST1 5HU, UK
+44 (0) 1782 203700
Emergency Contacts
UK NHS
111
Ireland NPIS
+353 1 8092566
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Lubricating grease: Thickener system and additives in solvent refined mineral oil.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Naphthenic acids, zinc salts EC: 234-409-2 | --- | 1 - 5% | Yes |
| organic Polysulphide EC: 273-103-3 | --- | 0.1 - 1% | Yes |
| amine phosphate EC: 931-384-6 | --- | 0.1 - 1% | Yes |
| Tolutriazole derivative EC: 939-700-4 | --- | 0.1 - 1% | Yes |
| alkenyl amine, long-chain EC: 204-015-5 | --- | 0.01 - 0.25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Wash with soap and water.
Promptly wash eyes with plenty of water while lifting the eye lids.
Rinse mouth thoroughly.
Immediate Medical Attention
Get medical attention if symptoms occur.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level.
Material: Nitrile butyl rubber (NBR). Avoid long-term and repeated skin contact. Suitable gloves can be recommended by the glove supplier. Use skin protection cream for preventive skin protection. Protective gloves, where permitted in acc. to safety directions. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses (EN 166) recommended during refilling.
Not relevant, due to the form of the product.
Do not carry cleaning cloths impregnated with the product in trouser pockets. Wear suitable protective clothing.
No data available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RENOLIT EP 2?
The signal word is no signal word.
What is the physical form of RENOLIT EP 2?
RENOLIT EP 2 is a solid appearing as dark brown with dark brown color. It has characteristic odor.
What is RENOLIT EP 2 used for?
Lubricating grease
What are the hazard statements for RENOLIT EP 2?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of RENOLIT EP 2?
The melting point is > 180 °C and the boiling point is > 250 °C.