Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Indole-3-butyric acid ≥99%, for biochemistry
- Product Code
- 4143
Regulatory Identifiers
- CAS Number
- 133-32-4 Check regulations →
- EC Number
- 205-101-5 Check regulations →
Identified Uses
Laboratory chemical Laboratory and analytical use
Uses advised against
Do not use for products which come into contact with foodstuffs. Do not use for private purposes (household). Food, drink and animal feeding-stuffs.
Manufacturers & Suppliers
Carl Roth GmbH + Co. KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe, Germany
+49 (0) 721 - 56 06 0
http://www.carlroth.de
Emergency Contacts
National Poisons Information Service City Hospital
844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Indole-3-butyric acid ≥99%, for biochemistry
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Indole-3-butyric acid EC: 205-101-5 | 133-32-4 | 99% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.
Symptoms: Cough, Dyspnoea
Rinse skin with water/shower. In case of skin irritation, consult a physician.
Symptoms: Irritation
Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. In case of eye irritation consult an ophthalmologist.
Symptoms: Irritation
Rinse mouth immediately and drink plenty of water. Call a physician immediately.
Symptoms: Nausea
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical advice. In case of skin irritation, consult a physician. In case of eye irritation consult an ophthalmologist. Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
co-ordinate firefighting measures to the fire surroundings! water, foam, dry extinguishing powder, ABC-powder
water jet
Combustible.
Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Avoid contact with skin, eyes and clothes. Do not breathe dust.
Retain contaminated washing water and dispose of it.
Take up mechanically.
Related Products
Similar products with comparable safety profiles
2-Propanol ≥ 99,5%, for synthesis
CAS: 67-63-0
Acetone ≥99,5 %, for synthesis
CAS: 67-64-1
Isobutanol for analysis EMSURE® ACS, Reag. Ph Eur
CAS: 78-83-1
3-Hydroxy-2-naphthoic acid, 98%
---
Ethylene glycol ≥99 %, for synthesis
CAS: 107-21-1
n-Butyl acetate for analysis EMSURE®
CAS: 123-86-4
Indole-7-carboxaldehyde
CAS: 1074-88-0
2-Imidazolidinethione, 98%
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Clear contaminated areas thoroughly.
Store in a dry place. Keep in a cool place.
When using do not eat or drink. Thorough skin-cleansing after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 °C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. Type of material: NBR (Nitrile rubber). Material thickness: >0,11 mm. Breakthrough times of the glove material: >480 minutes (permeation: level 6).
Use safety goggle with side protection.
Respiratory protection necessary at: Dust formation. Particulate filter device (EN 143). P3 (filters at least 99,95 % of airborne particles, colour code: White).
Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.
The product in the delivered form is not dust explosion capable; the enrichment of fine dust however leads to the danger of dust explosion.
Violent reaction with: strong oxidiser, Strong alkali
Direct light irradiation.
strong oxidiser, Strong alkali
Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2811
- Shipping Name
- TOXIC SOLID, ORGANIC, N.O.S.
- Transport Class
- 6.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Indole-3-butyric acid ≥99%, for biochemistry?
The signal word is danger.
What is the physical form of Indole-3-butyric acid ≥99%, for biochemistry?
Indole-3-butyric acid ≥99%, for biochemistry is a solid with beige - light yellow color. It has odourless odor.
What is Indole-3-butyric acid ≥99%, for biochemistry used for?
Laboratory chemical Laboratory and analytical use
What are the hazard statements for Indole-3-butyric acid ≥99%, for biochemistry?
This substance has 4 hazard statements:
- H301: Toxic if swallowed
- H315: Causes skin irritation
- H319: Causes serious eye irritation
- H335: May cause respiratory irritation
What is the melting point of Indole-3-butyric acid ≥99%, for biochemistry?
The melting point is 120 – 126 °C and the boiling point is 426,6 °C.