Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Ethanolamine ≥99 %, for synthesis
- Product Code
- 4376
- Chemical Name
- Ethanolamine
- Synonyms
- 2-Aminoethanol
Regulatory Identifiers
- CAS Number
- 141-43-5 Check regulations →
- EC Number
- 205-483-3 Check regulations →
Identified Uses
Laboratory chemical Laboratory and analytical use Formulation [mixing] of preparations and/or repackaging (excluding alloys) Intermediate Industrial uses Professional uses
Uses advised against
Do not use for squirting or spraying. Do not use for products which come into direct contact with the skin. Do not use for private purposes (household). Food, drink and animal feedingstuffs.
Manufacturers & Suppliers
Carl Roth GmbH + Co. KG
manufacturer
Schoemperlenstr. 3-5, D-76185 Karlsruhe
+49 (0) 721 - 56 06 0
http://www.carlroth.de
Emergency Contacts
National Poisons Information Service City Hospital
844 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethanolamine EC: 205-483-3 | 141-43-5 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice.
Symptoms: Dizziness, Irritation, Cough, Dyspnoea
After contact with skin, wash immediately with plenty of water.
Symptoms: Corrosion, Irritation
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Protect uninjured eye.
Symptoms: Risk of serious damage to eyes, Risk of blindness
Rinse mouth immediately and drink plenty of water. Rinse mouth with water (only if the person is conscious). Call a physician immediately.
Symptoms: If swallowed danger of perforation of the esophagus and the stomach (strong corrosive effects).
Immediate Medical Attention
Immediate medical treatment required because corrosive injuries that are not treated are hard to cure. Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water spray, alcohol resistant foam, dry extinguishing powder, BC-powder, carbon dioxide (CO₂)
water jet
Combustible. Vapours are heavier than air, spread along floors and form explosive mixtures with air.
Fight fire with normal precautions from a reasonable distance.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full chemical protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Avoid contact with skin, eyes and clothes. Do not breathe vapour/spray.
Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.
Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents). Place in appropriate containers for disposal.
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Ethanolamine
CAS: 141-43-5
Ethanolamine
CAS: 141-43-5
Ethanolamine
CAS: 141-43-5
Ethanolamine
CAS: 141-43-5
Ethylene glycol ≥99 %, for synthesis
CAS: 107-21-1
2-(Dimethylamino)-ethanol for synthesis
CAS: 108-01-0
Ethanolamine for analysis EMSURE®
CAS: 141-43-5
Ethanol ≥98 %, technical, denatured
UFI: YRY3-H0D4-D00C-1WCM
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle and open container with care. Clear contaminated areas thoroughly.
Keep container tightly closed. Hygroscopic.
Wash hands before breaks and after work. Keep away from food, drink and animal feedingstuffs.
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. The times are approximate values from measurements at 22 °C and permanent contact. Increased temperatures due to heated substances, body heat etc. and a reduction of the effective layer thickness by stretching can lead to a considerable reduction of the breakthrough time. If in doubt, contact manufacturer. At an approx. 1.5 times larger / smaller layer thickness, the respective breakthrough time is doubled / halved. The data apply only to the pure substance. When transferred to substance mixtures, they may only be considered as a guide. type of material: NR: natural rubber, latex, Butyl caoutchouc (butyl rubber). material thickness: 0,6 mm. breakthrough times of the glove material: >480 minutes (permeation: level 6). Splash protection - Protective gloves: - type of material: NBR (Nitrile rubber) - material: >0,11 mm thickness: - breakthrough times of the glove material: >10 minutes (permeation: level 1)
Use safety goggle with side protection. Wear face protection.
Respiratory protection necessary at: Aerosol or mist formation. Type: A (against organic gases and vapours with a boiling point of > 65 °C, colour code: Brown).
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Keep away from drains, surface and ground water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Moisture-sensitive.
This material is not reactive under normal ambient conditions.
Exothermic reaction with: strong oxidiser, Acetic acid, Acetic anhydride, Mineral acids, Nitric acid, Sulphuric acid
Humidity. Keep away from heat.
different plastics, copper
Hazardous combustion products: see section 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
The substance is readily biodegradable.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
Does not significantly accumulate in organisms.
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not a PBT or a vPvB.
12.6 Endocrine disrupting properties
Does not contain an endocrine disruptor (ED) at a concentration of ≥ 0,1%.
12.7 Other adverse effects
Data are not available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with local/regional/national/international regulations.
This material and its container must be disposed of as hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2491
- Shipping Name
- ETHANOLAMINE
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Directive 94/33/EC on the protection of young people at work. Observe employment restrictions under the Maternity Protection Directive (92/85/EEC) for expectant or nursing mothers.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Ethanolamine ≥99 %, for synthesis known by?
Ethanolamine ≥99 %, for synthesis is also known as: 2-Aminoethanol
What is the hazard signal word for Ethanolamine ≥99 %, for synthesis?
The signal word is danger.
What is the physical form of Ethanolamine ≥99 %, for synthesis?
Ethanolamine ≥99 %, for synthesis is a liquid with clear color. It has like ammonia odor.
What is Ethanolamine ≥99 %, for synthesis used for?
Laboratory chemical Laboratory and analytical use Formulation [mixing] of preparations and/or repackaging (excluding alloys) Intermediate Industrial uses Professional uses
What are the hazard statements for Ethanolamine ≥99 %, for synthesis?
This substance has 3 hazard statements:
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled
- H314: Causes severe skin burns and eye damage
- H335: May cause respiratory irritation
What is the melting point of Ethanolamine ≥99 %, for synthesis?
The melting point is 10,5 °C and the boiling point is 167 °C at 101 kPa (ECHA).