Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3M™ Primer 94 (Ampoules)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesion Promoter, Industrial use
Manufacturers & Suppliers
3M
manufacturer
3M Center, St. Paul, MN 55144-1000, USA
1-888-3M HELPS (1-888-364-3577)
Emergency Contacts
Emergency Contact
1-800-364-3577
24 hours
Emergency Contact
(651) 737-6501
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Toluene | 108-88-3 | 0.22% | No |
| Chlorobenzene | 108-90-7 | 0.11% | No |
| MIBK | 108-10-1 | 0.08% | No |
| Maleic Anhydride | 108-31-6 | 0.014% | No |
| Cyclohexane | 110-82-7 | 30 - 60% | No |
| Xylene | 1330-20-7 | 15 - 40% | No |
| Ethyl Alcohol | 64-17-5 | 5 - 10% | No |
| Ethylbenzene | 100-41-4 | 5 - 10% | No |
| Chlorinated Polyolefin | 68609-36-9 | 1 - 5% | No |
| Ethyl Acetate | 141-78-6 | 1 - 5% | No |
| Acrylate Polymer (NJTS Reg. No. 04499600-5984P) | --- | 5% | No |
| Beta-(3,4-Epoxycyclohexyl)ethyltrimethoxy Silane | 3388-04-3 | 0.1 - 1% | No |
| Epoxy Resin | 25068-38-6 | 0.1 - 1% | No |
| Isopropyl Alcohol | 67-63-0 | 1% | No |
| Methyl Alcohol | 67-56-1 | 0.1 - 1% | No |
NJTS or NJTSRN: New Jersey Trade Secret Registry Number.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If you feel unwell, get medical attention.
Symptoms: Coughing, gasping, choking, difficulty breathing.
Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop, get medical attention.
Symptoms: Allergic skin reaction (redness, swelling, blistering, and itching).
Immediately flush with large amounts of water for at least 15 minutes. Remove contact lenses if easy to do. Continue rinsing. Immediately get medical attention.
Do not induce vomiting. Get immediate medical attention.
Symptoms: Burning of the mouth.
Immediate Medical Attention
Get medical attention if you feel unwell (inhalation), if signs/symptoms develop (skin), immediately for eye contact, or immediately if swallowed.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use a fire fighting agent suitable for flammable liquids such as dry chemical or carbon dioxide to extinguish.
Closed containers exposed to heat from fire may build pressure and explode.
Use water to keep fire-exposed containers and surfaces cool and prevent explosive rupture.
Firefighter Protection
Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Ventilate the area with fresh air. For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.
For large spill, or spills in confined spaces, provide mechanical ventilation to disperse or exhaust vapors, in accordance with good industrial hygiene practice.
Avoid release to the environment.
Collect as much of the spilled material as possible using non-sparking tools. Clean up residue with an appropriate solvent selected by a qualified and authorized person.
Related Products
Similar products with comparable safety profiles
3M Unitek Transbond XT Primer
---
3M Unitek Transbond XT Primer
---
UV-Primer LM 4567
---
UV-Primer LM 4567
---
2C-EP Primer, quick curing
---
3M(TM) CARPET PROTECTOR 94(CONCENTRATE)
---
Deoxaluminite Primer, 155-00
---
3369 / 3380 - CombiPrimer primers red & grey
UFI: A630-V02Q-R00P-9WN7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For industrial use only. Not intended for use as a medical device or drug. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing. Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment. Wash contaminated clothing before reuse. Avoid contact with oxidizing agents (eg. chlorine, chromic acid etc.) Wear low static or properly grounded shoes. Use personal protective equipment (gloves, respirators, etc.) as required.
Store in a well-ventilated place. Keep cool. Keep container tightly closed. Protect from sunlight. Store away from heat.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reuse.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use only non-sparking tools. Take precautionary measures against static discharge. Wear low static or properly grounded shoes.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment. Use explosion-proof ventilation equipment.
Gloves made from the following material(s) are recommended: Polymer laminate. Note: Nitrile gloves may be worn over polymer laminate gloves to improve dexterity.
Safety Glasses with side shields, Indirect Vented Goggles
Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates, Half facepiece or full facepiece supplied-air respirator. Organic vapor cartridges may have short service life.
If this product is used in a manner that presents a higher potential for exposure (eg. spraying, high splash potential etc.), then use of protective coveralls may be necessary. Select and use body protection to prevent contact based on the results of an exposure assessment. The following protective clothing material(s) are recommended: Apron - polymer laminate
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
This material is considered to be non reactive under normal use conditions.
Hazardous polymerization will not occur.
Heat, Sparks and/or flames
Strong oxidizing agents
None known. Refer to section 5.2 for hazardous decomposition products during combustion.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate in a permitted waste incineration facility. As a disposal alternative, utilize an acceptable permitted waste disposal facility.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3M™ Primer 94 (Ampoules)?
The signal word is danger.
What is the physical form of 3M™ Primer 94 (Ampoules)?
3M™ Primer 94 (Ampoules) is a liquid appearing as liquid, amber with amber color. It has mild solvent odor.
What is 3M™ Primer 94 (Ampoules) used for?
Adhesion Promoter, Industrial use
What are the hazard statements for 3M™ Primer 94 (Ampoules)?
This substance has 9 hazard statements:
- H225: Highly flammable liquid and vapor.
- H304: May be fatal if swallowed and enters airways.
- H317: May cause an allergic skin reaction.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer.
- H360: May damage fertility or the unborn child.
- H370: Causes damage to organs: sensory organs
- H372: Causes damage to organs through prolonged or repeated exposure: nervous system
- H373: May cause damage to organs through prolonged or repeated exposure: sensory organs
What is the melting point of 3M™ Primer 94 (Ampoules)?
The melting point is Not Applicable and the boiling point is 170 °F.