NextSDS Logo
Safety Data Sheet EN

WD-40 Multi-Use Product 25% VOC Bulk Liquid

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WD-40 Multi-Use Product 25% VOC Bulk Liquid
Product Form
Liquid

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant, Penetrant, Drives Out Moisture and Protects Surfaces From Corrosion

Uses advised against

None identified

Manufacturers & Suppliers

W

WD-40 Company

manufacturer

9715 Businesspark Avenue San Diego, California, USA 92131

1-888-324-7596

Emergency Contacts

Emergency Contact

1-888-324-7596

Chemtrec

1-800-424-9300

Chemtrec

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3
Asp. Tox. Cat. 1
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor.
H304 May be fatal if swallowed and enters airways.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. – No smoking.
P233 Keep container tightly closed.
P240 Ground and bond containers and receiving equipment.
P241 Use explosion-proof electrical equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharge.
P261 Avoid breathing mists or vapors.
P271 Use only outdoors or in a well-ventilated area.
P282 Wear eye protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or physician. Do NOT induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.
P370 + P378 In case of fire: Use water fog, dry chemical, carbon dioxide or foam to extinguish.
P403 + P233 Store in a well-ventilated place. Keep cool. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents and container in accordance with local and national regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
LVP Aliphatic Hydrocarbon 64742-47-8 40 - 50% Yes
Petroleum Base Oil --- 35% No
Aliphatic Hydrocarbon 64742-47-8 20 - 30% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If irritation is experienced, move to fresh air. Get medical attention if irritation or other symptoms develop and persist.

Symptoms: May cause respiratory irritation. Inhalation of mists or vapors may cause drowsiness, dizziness and other nervous system effects.

Skin contact

Wash with soap and water. If irritation develops and persists, get medical attention.

Symptoms: Skin contact may cause drying of the skin.

Eye contact

Flush thoroughly with water. Remove contact lenses if present after the first 5 minutes and continue flushing for several more minutes. Get medical attention if irritation persists.

Symptoms: May cause eye irritation.

Ingestion

Aspiration Hazard. Call physician, poison control center or the WD-40 Safety Hotline at 1-888-324-7596 immediately.

Symptoms: Harmful or fatal if swallowed. Aspiration of liquid into the lungs during swallowing or vomiting may cause lung damage.

Immediate Medical Attention

Immediate medical attention is needed for ingestion.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water fog, dry chemical, carbon dioxide or foam.

Unsuitable media

Do not use water jet or flooding amounts of water. Burning product will float on the surface and spread fire.

Specific hazards

Flammable liquid and vapor. Vapors are heavier than air and may travel along surfaces to remote ignition sources and flash back.

Instructions

Cool fire-exposed containers with water.

Firefighter Protection

Firefighters should always wear positive pressure self-contained breathing apparatus and full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear appropriate protective clothing (see Section 8). Eliminate all sources of ignition and ventilate area.

Cleanup methods

Clean spill area thoroughly.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes. Avoid prolonged contact with skin. Avoid breathing vapors or aerosols. Use with adequate ventilation. Keep away from heat, sparks, hot surfaces and open flames. Wash thoroughly with soap and water after handling. Keep containers closed when not in use. Keep out of the reach of children.

Storage

Store in a cool, well-ventilated area, away from incompatible materials. NFPA 30 Class II Liquid.

Hygiene

Wash thoroughly with soap and water after handling.

Fire prevention

Keep away from heat, sparks, hot surfaces and open flames.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Light green to amber
Colour Intensity
---
Form
---
Odor
Mild petroleum odor
Odor Threshold
---
Ph
Not Applicable
Melting Point
Not established
Boiling Point
322 - 388°F (161 - 198°C)
Flash Point
138°F (59°C) Tag Closed Cup
Freezing Point
Not established
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
1 psi @38°C (100°F) ASTM D323
Vapor Density
---
Relative Density
0.8 – 0.82 @ 60°F
Bulk Density
---
Density
---
Flammability
Flammable Liquid
Upper Explosive Limit
5.6%
Lower Explosive Limit
0.8%
Explosive Limits
---
Auto Ignition Temperature
Not established
Decomposition Temperature
Not established
Solubility
Insoluble in water
Partition Coefficient
Not established
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
24.9% MIR=0.44 gO3/gVOC (204 grams/liter)
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
2.79-2.96 cSt @ 100°F
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

Not reactive under normal conditions

Hazardous reactions

May react with strong oxidizers generating heat.

Avoid

Avoid heat, sparks, flames and other sources of ignition.

Incompatible

Strong oxidizing agents.

Decomposition

Carbon monoxide and carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1268
Shipping Name
Petroleum Distillates, n.o.s.
Transport Class
3
Packing Group
III
IATA

WD-40 Company does not test containers to assure that they meet the pressure differential and other requirements for transport by air. We do not recommend that our products be transported by air.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for WD-40 Multi-Use Product 25% VOC Bulk Liquid?

The signal word is danger.

What is the physical form of WD-40 Multi-Use Product 25% VOC Bulk Liquid?

WD-40 Multi-Use Product 25% VOC Bulk Liquid is a liquid with light green to amber color. It has mild petroleum odor odor.

What is the solubility of WD-40 Multi-Use Product 25% VOC Bulk Liquid?

Insoluble in water

What is WD-40 Multi-Use Product 25% VOC Bulk Liquid used for?

Lubricant, Penetrant, Drives Out Moisture and Protects Surfaces From Corrosion

What are the hazard statements for WD-40 Multi-Use Product 25% VOC Bulk Liquid?

This substance has 3 hazard statements:

  • H226: Flammable liquid and vapor.
  • H304: May be fatal if swallowed and enters airways.
  • H336: May cause drowsiness or dizziness.

What is the melting point of WD-40 Multi-Use Product 25% VOC Bulk Liquid?

The melting point is Not established and the boiling point is 322 - 388°F (161 - 198°C).