Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AS-90
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Welding Products
Manufacturers & Suppliers
CRC Industries UK Ltd.
manufacturer
Wylds Road, Castlefield Industrial Estate, TA6 4DD Bridgwater Somerset, United Kingdom
+44 1278 727200
Emergency Contacts
Emergency Contact
(+44)(0)1278 72 7200
office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Fresh air, keep warm and at rest. If breathing is difficult give oxygen Apply artificial respiration only if patient is not breathing
Symptoms: May cause irritation. High concentrations may cause narcotic effects. Symptoms : sore throat, cough, shortness of breath, severe breathing difficulties, headache
Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water
Symptoms: May cause irritation. Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis Symptoms : redness and pain
Immediately wash out with plenty of water
Symptoms: May cause irritation. Symptoms : redness and pain
Do not induce vomiting Rinse mouth with water (do not swallow)
Symptoms: After vomiting of swallowed product aspiration into lungs is likely. Solvents may induce chemical pneumonia. Symptoms : abdominal pain, dizziness, diarrhea, cough, headache
Immediate Medical Attention
Seek medical advice (eyes); Seek medical attention if irritation persists (skin); Seek immediate medical attention (inhalation); If swallowed seek medical advice immediately and show this container or label (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, carbon dioxide or dry agent
Aerosols may explode if heated above 50°C
Keep container(s) exposed to fire cool, by spraying with water
Firefighter Protection
In case of fire, do not breathe fumes. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter public sewers and watercourses
Wash spill site with water and detergent
Materials: water and detergent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and sources of ignition. Use only non-sparking tools. Avoid contact with skin and eyes. Wear protective gloves/protective clothing/eye protection/face protection.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50°C. Keep in a cool, dry, well ventilated place.
Wash thoroughly after use
Take precautionary measures against static discharges
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation
Wear suitable protective gloves. The breakthrough time of the glove should be longer than the total duration of product use. If work lasts longer than the breakthrough time, gloves should be changed part-way through. Recommended gloves: (butyl rubber)
Wear safety eyewear according to EN 166.
In case of insufficient ventilation, wear suitable respiratory equipment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No hazardous reactions known if used for its intended purpose
No hazardous reactions known if used for its intended purpose
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C. Avoid overheating
Strong oxidising agent
CO, CO2, HCl, traces of chlorine and phosgene
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AS-90?
The signal word is warning.
What is the physical form of AS-90?
AS-90 is a liquid. appearing as liquid. with yellow. color.
What is AS-90 used for?
Welding Products
What are the hazard statements for AS-90?
This substance has 7 hazard statements:
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H336: May cause drowsiness or dizziness.
- H351: Suspected of causing cancer .
- H373: May cause damage to organs through prolonged or repeated exposure