Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ProSolve Acrylic Line Marker
- Product Form
- Mixture
- Product Code
- PVLMBLA7A, PVLMB7A, PVLMG7A, PVLMO7A, PVLMR7A, PVLMW7A and PVLMY7A
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
ProSolve
manufacturer
Sandall Stones Road, Kirk Sandall Industrial Estate, Doncaster, South Yorkshire, DN3 1QR
+44 (0) 1302 310 113
http://www.prosolveproducts.com
Emergency Contacts
National Health Service (NHS)
111
National Health Service (NHS)
0300 0604400
Emergency Contact
999
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dimethyl ether EC: 204-065-8 | 115-10-6 | 35 - 45% | Yes |
| Resin acids and Rosin acids, esters with glycerol EC: 232-482-5 | 8050-31-5 | 12 - 14% | No |
| titanium dioxide; [in powder form containing 1 % or more of particles with aerodynamic diameter ≤ 10 μm] EC: 236-675-5 | 13463-67-7 | 12 - 15% | Yes |
| Dimethoxymethane EC: 203-714-2 | 109-87-5 | 10 - 15% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
No special measures are necessary. Provide fresh air.
Wash immediately with: Water. When in doubt or if symptoms are observed, get medical advice.
Rinse immediately carefully and thoroughly with eye-bath or water. In case of eye irritation consult an ophthalmologist.
Rinse mouth thoroughly with water. Do NOT induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC-powder, Carbon dioxide (CO2), Foam, Extinguishing powder
Full water jet
Shut off supply; if not possible and no risk to surroundings, let the fire burn itself out. In case of fire: keep cylinder cool by spraying with water. Combat fire from a sheltered position.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection equipment. Provide adequate ventilation.
Control runoff & isolate discharged material for proper disposal.
Related Products
Similar products with comparable safety profiles
Artline Permanent Marker
---
Pro-Line® HP Paint Markers
---
Artline Permanent Marker / Artline marking INK
---
RAL Acrylic Spray
---
PRO-LINE® Fine Line, PRO-LINE® Microline, PRO-MAX™, POCKET, and SL.100 PAINT MARKER - Blue, Green, Light Green, Orange, Red, Yellow, Pink, Grey, Silver, Purple, Gold, Light Blue, and Brown
---
Berasit Linienmarkierer 600ml
---
MARKER PEN - Red
UFI: 8VGY-78AJ-A00C-RUJ5
Security Check Paint Marker
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Vapours/aerosols must be exhausted directly at the point of origin. Flammable vapours can accumulate in head space of closed systems. Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Do not spray on naked flames or any incandescent material.
Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. Do not spray on naked flames or any incandescent material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
eye/face protection
Suitable protective clothing and equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under recommended conditions of storage, use and temperature.
This material is considered to be non-reactive under normal use conditions.
No hazardous reaction when handled and stored according to provisions.
In case of warming: Danger of bursting container.
No information available.
Does not decompose when used for intended uses.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ProSolve Acrylic Line Marker?
The signal word is danger.
What are the hazard statements for ProSolve Acrylic Line Marker?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol
- H229: Pressurised container: May burst if heated
What is the melting point of ProSolve Acrylic Line Marker?
The melting point is Pure CAS 115-10-6: -141°C; Pure CAS 13463-67-7: 1850°C; Pure CAS 109-87-5: -105°C and the boiling point is Pure CAS 115-10-6: -24.8°C; Pure CAS 13463-67-7: 2900°C; Pure CAS 109-87-5: 41-43°C.